修复你的物品 社区 商店

Motorola MBP33SBU Baby Unit Speaker Replacement

简介

The Baby Unit Speaker allows sound between the two units. You will need a soldering kit to successfully install a new speaker.

你所需要的

  1. Motorola MBP33SBU Baby Unit Speaker Replacement, Baby Unit Speaker: 步骤 1 中的图像 1，3 Motorola MBP33SBU Baby Unit Speaker Replacement, Baby Unit Speaker: 步骤 1 中的图像 2，3 Motorola MBP33SBU Baby Unit Speaker Replacement, Baby Unit Speaker: 步骤 1 中的图像 3，3

    • Using precision tweezers, remove the (4) four rubber feet from the bottom of the baby unit.

    • Using a Phillips #1 screwdriver remove the 9.5mm screws that were under the rubber feet.

    • Open the base of the baby unit.

    编辑

  3. Motorola MBP33SBU Baby Unit Speaker Replacement: 步骤 2 中的图像 1，3 Motorola MBP33SBU Baby Unit Speaker Replacement: 步骤 2 中的图像 2，3 Motorola MBP33SBU Baby Unit Speaker Replacement: 步骤 2 中的图像 3，3

    • Using the Phillips #1 screwdriver remove the 9.5mm washer head screws holding the speaker in place.

    • Gently lift the speaker by the wires from its plastic base.

    编辑

  4. Motorola MBP33SBU Baby Unit Speaker Replacement: 步骤 3 中的图像 1，2 Motorola MBP33SBU Baby Unit Speaker Replacement: 步骤 3 中的图像 2，2

    • Desolder the wires connecting the speaker to the circuit board.

    • Beware of overheating, the soldering kit is capable of damaging the circuit board.

    • Beware of the potential for personal injury from heated metals.

    • For soldering procedures please refer to iFixit's guide to Soldering Skills.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 5

过去 30 天： 11

总计 1,928