跳转到主内容

Motorola Droid X2 Rear Facing Camera Replacement

你所需要的

  1. Motorola Droid X2 Rear Facing Camera Replacement, Battery: 步骤 1 中的图像 1,3 Motorola Droid X2 Rear Facing Camera Replacement, Battery: 步骤 1 中的图像 2,3 Motorola Droid X2 Rear Facing Camera Replacement, Battery: 步骤 1 中的图像 3,3
    • Slide the plastic case off of the back of the phone, exposing the battery.

  2. Motorola Droid X2 Rear Facing Camera Replacement: 步骤 2 中的图像 1,3 Motorola Droid X2 Rear Facing Camera Replacement: 步骤 2 中的图像 2,3 Motorola Droid X2 Rear Facing Camera Replacement: 步骤 2 中的图像 3,3
    • Pull up on the red battery release tab and pull the battery out of the phone.

  3. Motorola Droid X2 Rear Facing Camera Replacement, Motherboard: 步骤 3 中的图像 1,2 Motorola Droid X2 Rear Facing Camera Replacement, Motherboard: 步骤 3 中的图像 2,2
    • Remove the circled screws using a T-5 torques. These screws will be 4.3 millimeters in length.

    • Be careful to not strip any screws.

  4. Motorola Droid X2 Rear Facing Camera Replacement: 步骤 4 中的图像 1,3 Motorola Droid X2 Rear Facing Camera Replacement: 步骤 4 中的图像 2,3 Motorola Droid X2 Rear Facing Camera Replacement: 步骤 4 中的图像 3,3
    • Using a prying tool, snap off the front casing on the top and bottom of the phone.

    • Be careful not to lose the small rubber piece that sits over the microphone.

  5. Motorola Droid X2 Rear Facing Camera Replacement: 步骤 5 中的图像 1,2 Motorola Droid X2 Rear Facing Camera Replacement: 步骤 5 中的图像 2,2
    • Remove the circled screws using a T-5 torques.. These screws should be 5.8 millimeters in length.

  6. Motorola Droid X2 Rear Facing Camera Replacement: 步骤 6 中的图像 1,3 Motorola Droid X2 Rear Facing Camera Replacement: 步骤 6 中的图像 2,3 Motorola Droid X2 Rear Facing Camera Replacement: 步骤 6 中的图像 3,3
    • Using a plastic opening tool, snap open the phone. It should separate into a front piece with the hardware and a plastic backing.

  7. Motorola Droid X2 Rear Facing Camera Replacement: 步骤 7 中的图像 1,3 Motorola Droid X2 Rear Facing Camera Replacement: 步骤 7 中的图像 2,3 Motorola Droid X2 Rear Facing Camera Replacement: 步骤 7 中的图像 3,3
    • Using tweezers, remove the white wire at the top of the phone near the camera.

  8. Motorola Droid X2 Rear Facing Camera Replacement: 步骤 8 中的图像 1,2 Motorola Droid X2 Rear Facing Camera Replacement: 步骤 8 中的图像 2,2
    • Remove these nine screws using a T-3 torques. These screws should be 2.40 mm in length

  9. Motorola Droid X2 Rear Facing Camera Replacement: 步骤 9 中的图像 1,2 Motorola Droid X2 Rear Facing Camera Replacement: 步骤 9 中的图像 2,2
    • Using tweezers, removed the white electrical tape on the motherboard.

  10. Motorola Droid X2 Rear Facing Camera Replacement: 步骤 10 中的图像 1,2 Motorola Droid X2 Rear Facing Camera Replacement: 步骤 10 中的图像 2,2
    • Using the plastic opening tool, lift up to remove the connector.

  11. Motorola Droid X2 Rear Facing Camera Replacement: 步骤 11 中的图像 1,2 Motorola Droid X2 Rear Facing Camera Replacement: 步骤 11 中的图像 2,2
    • Using a pry tool, lift the jawbone connector.

  12. Motorola Droid X2 Rear Facing Camera Replacement: 步骤 12 中的图像 1,2 Motorola Droid X2 Rear Facing Camera Replacement: 步骤 12 中的图像 2,2
    • Using tweezers, carefully disconnect the cable connector by pulling the cable out.

  13. Motorola Droid X2 Rear Facing Camera Replacement: 步骤 13 中的图像 1,3 Motorola Droid X2 Rear Facing Camera Replacement: 步骤 13 中的图像 2,3 Motorola Droid X2 Rear Facing Camera Replacement: 步骤 13 中的图像 3,3
    • Use a spudger to disconnect the cable connector.

  14. Motorola Droid X2 Rear Facing Camera Replacement: 步骤 14 中的图像 1,3 Motorola Droid X2 Rear Facing Camera Replacement: 步骤 14 中的图像 2,3 Motorola Droid X2 Rear Facing Camera Replacement: 步骤 14 中的图像 3,3
    • Using a spudger, remove the camera. Lift up the motherboard and slide the spudger under the camera.

  15. Motorola Droid X2 Rear Facing Camera Replacement, Rear Facing Camera: 步骤 15 中的图像 1,3 Motorola Droid X2 Rear Facing Camera Replacement, Rear Facing Camera: 步骤 15 中的图像 2,3 Motorola Droid X2 Rear Facing Camera Replacement, Rear Facing Camera: 步骤 15 中的图像 3,3
    • There should be jawbone connector here. However it was broken on this particular device. Lift it up using a pry tool.

    • Using tweezers, remove cable from motherboard.

结论

To reassemble your device, follow these instructions in reverse order.

Aaron Mak

于10/29/14注册

658 声望

创作了4篇指南

团队

UMass Dartmouth, Team 4-3, Miles Fall 2014 UMass Dartmouth, Team 4-3, Miles Fall 2014 的会员

UMASSD-MILES-F14S4G3

3 名成员

创作了8篇指南

一条评论

how do u get it back on when it dose not come back on

brianna

Brianna Dittbrenner - 回复

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 262