跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

Use this guide to replace the front-facing camera on your Motorola Droid Turbo.

  1. Prepare an iOpener and lay it over the rear case to soften the adhesive on securing the rear case to the phone.
    • Prepare an iOpener and lay it over the rear case to soften the adhesive on securing the rear case to the phone.

  2. Use a plastic opening tool to pry the rear case off of the rest of the device. Remove the rear case.
    • Use a plastic opening tool to pry the rear case off of the rest of the device.

    • Remove the rear case.

    • The wireless charging coil may try to stick to the rear case, so make sure to remove it from the case before fully separating the rear case from the rest of the device.

  3. Remove the midframe bezel.
    • Remove the midframe bezel.

  4. Manta 螺丝刀工具包

    112 bits for every fix.

    Upgrade Your Toolbox

    Manta 螺丝刀工具包

    Upgrade Your Toolbox
  5. Remove the four Torx T5 screws securing the midframe plate.
    • Remove the four Torx T5 screws securing the midframe plate.

  6. Remove the midframe.
    • Remove the midframe.

  7. Use the pointed end of a spudger to flip up the black retaining flap of the front facing camera's ZIF connector. Use the pointed end of a spudger to flip up the black retaining flap of the front facing camera's ZIF connector.
    • Use the pointed end of a spudger to flip up the black retaining flap of the front facing camera's ZIF connector.

  8. Remove the front-facing camera. Remove the front-facing camera.
    • Remove the front-facing camera.

结论

To reassemble your device, follow these instructions in reverse order.

Luis Arangu

于2016年01月20日注册

1,073 信誉积分

创作了3篇指南

团队

USF Tampa, Team 15-5, Remmell Spring 2016 USF Tampa, Team 15-5, Remmell Spring 2016 的会员

USFT-REMMELL-S16S15G5

3 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 1

过去的30天: 4

总计 1,566