跳转到主内容

简介

This guide will take you through the delicate process of removing the rear panel of the Motorola Droid.

配件

没有特定配件。

  1. Motorola Droid Rear Case Replacement, Battery: 步骤 1 中的图像 1,3 Motorola Droid Rear Case Replacement, Battery: 步骤 1 中的图像 2,3 Motorola Droid Rear Case Replacement, Battery: 步骤 1 中的图像 3,3
    • Slide the battery cover downwards while applying pressure to the center of the battery cover with your thumb.

    • Lift and remove the battery cover out from the phone.

  2. Motorola Droid Rear Case Replacement: 步骤 2 中的图像 1,1
    • Grasp the upper left corner of the battery and lift it out of its housing.

  3. Motorola Droid Rear Case Replacement, Rear Case: 步骤 3 中的图像 1,1
    • Use a spudger to lift and remove the black plastic screw cover at the top of the phone near the camera.

    • The cover is attached by adhesive, so some force may be required.

  4. Motorola Droid Rear Case Replacement: 步骤 4 中的图像 1,2 Motorola Droid Rear Case Replacement: 步骤 4 中的图像 2,2
    • Using the tip of a spudger, peel up one corner of the gold ribbon beneath the battery compartment.

    • Peel the ribbon up off the phone.

  5. Motorola Droid Rear Case Replacement: 步骤 5 中的图像 1,2 Motorola Droid Rear Case Replacement: 步骤 5 中的图像 2,2
    • Carefully peel the device information label that covers the motherboard EMI shields.

    • This label contains important information specific to the phone. Remove it with care and keep it in a safe place.

  6. Motorola Droid Rear Case Replacement: 步骤 6 中的图像 1,1
    • Insert the flat end of a spudger and pry the plastic camera cover up off the phone.

    • The thin plastic cover is attached to the phone with an adhesive. Work slowly and carefully.

  7. Motorola Droid Rear Case Replacement: 步骤 7 中的图像 1,1
    • Remove the seven 5.5 mm T5 Torx screws securing the rear case to the inner case.

  8. Motorola Droid Rear Case Replacement: 步骤 8 中的图像 1,1
    • Insert the flat end of a spudger and pry downwards to release the plastic tab holding the rear case to the motherboard screw.

  9. Motorola Droid Rear Case Replacement: 步骤 9 中的图像 1,1
    • Gently insert a spudger between the rear case and front case at the top of the phone, near the audio jack.

    • Carefully pry the top edge of the rear case up from the rest of the phone.

  10. Motorola Droid Rear Case Replacement: 步骤 10 中的图像 1,2 Motorola Droid Rear Case Replacement: 步骤 10 中的图像 2,2
    • With the spudger still inserted between the rear case and front case, slide the spudger along the right edge of the device, moving toward the bottom, prying as you go.

    • Continue prying along the bottom edge of the device from right to left, freeing it from the front panel.

  11. Motorola Droid Rear Case Replacement: 步骤 11 中的图像 1,2 Motorola Droid Rear Case Replacement: 步骤 11 中的图像 2,2
    • Continue prying the rear case from the front case along the left side, moving from bottom to top.

    • Lift the rear case up out of the phone.

结论

To reassemble your device, follow these instructions in reverse order.

6等其他人完成本指南。

Brett Hartt

于2010年04月12日注册

124,987 声望

创作了143篇指南

团队

iFixit iFixit 的会员

Community

145 名成员

创作了16,271篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 7

总计 40,647