修复你的物品 社区 商店

Motorola Droid Pro SD Card/SIM Card PCB Board Replacement

简介

Before continuing through the replacement process make sure you power down your devices and work in a clean area free of dirt. Also use a static band so you don't damage your device.

你所需要的

  1. Motorola Droid Pro SD Card/SIM Card PCB Board Replacement, SD Card/SIM Card PCB Board: 步骤 1 中的图像 1，2 Motorola Droid Pro SD Card/SIM Card PCB Board Replacement, SD Card/SIM Card PCB Board: 步骤 1 中的图像 2，2

    • Remove the back cover and battery by using the thumb tabs.

    翻译

  2. Motorola Droid Pro SD Card/SIM Card PCB Board Replacement: 步骤 2 中的图像 1，1

    • Unscrew the 8 back panel screws using the T4 Torx screwdriver.

    翻译

  4. Motorola Droid Pro SD Card/SIM Card PCB Board Replacement: 步骤 3 中的图像 1，1

    • Use a spudger to open the phone along the sides between the back panel and the chrome trim.

    • It is held together by small clips that lock in. You may have to use a little force to unlock them.

    • Go around on all sides then pull the back panel off.

    翻译

  5. Motorola Droid Pro SD Card/SIM Card PCB Board Replacement: 步骤 4 中的图像 1，2 Motorola Droid Pro SD Card/SIM Card PCB Board Replacement: 步骤 4 中的图像 2，2

    • Gently lift the SD & SIM card board (PCB) as shown in the following pictures.

    • This will expose the ribbon cable attached to the board and another ribbon cable for the mother board. Remove them both using the spudger.

    • Once the small one is removed the small board can be pulled off.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与6其他贡献者

Peter Cakounes

于10/21/14注册

19 声望

创作了4篇指南

徽章: 4

+1个徽章

团队

UMass Dartmouth, Team 5-8, Vijaybhaskar Fall 2014 UMass Dartmouth, Team 5-8, Vijaybhaskar Fall 2014 的会员

UMASSD-VIJAYBHASKAR-F14S5G8

4 名成员

创作了8篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 5

总计 192