跳转到主内容

简介

Use this guide to replace the midframe on your Motorola Defy.

  1. Using the screwdriver and the T-5 bit, unscrew the seven 5 mm screws around the outside of the phone.
    • Using the screwdriver and the T-5 bit, unscrew the seven 5 mm screws around the outside of the phone.

  2. Remove the back cover of the phone by sliding the bottom black button to the unlock position and lifting it up. Remove the back cover of the phone by sliding the bottom black button to the unlock position and lifting it up.
    • Remove the back cover of the phone by sliding the bottom black button to the unlock position and lifting it up.

  3. Use a plastic opening tool to pry the battery out of the phone.
    • Use a plastic opening tool to pry the battery out of the phone.

  4. Unscrew the two silver screws located at the top of the back of the phone.
    • Unscrew the two silver screws located at the top of the back of the phone.

  5. Use a plastic opening tool to gently pry the midframe from the rest of the phone.
    • Use a plastic opening tool to gently pry the midframe from the rest of the phone.

结论

To reassemble your device, follow these instructions in reverse order.

Geoff Wacker

于2013年09月30日注册

78,057 信誉积分

创作了88篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 168