简介

Motherboard installation requires a teardown of the device.

配件

无需配件。

Remove the battery by sliding it down the rails to which it is connected.
  • Remove the battery by sliding it down the rails to which it is connected.

添加评论

Find a flat head or Phillips head screwdriver.
  • Find a flat head or Phillips head screwdriver.

  • Insert the screwdriver into the holes in the plastic rod connecting the key pad guard to the rear casing.

  • Use the screwdriver to push the rods towards each other until they click out of their locked position.

  • Note: This may require a large amount of force.

添加评论

Slide off the antenna guard and locate the four clips on the exterior of the rear casing.
  • Slide off the antenna guard and locate the four clips on the exterior of the rear casing.

  • Simultaneously push the clips outward while lifting the rear casing and keyguard away from the front casing.

  • Remove the key guard from the rear casing by taking it out of its position.

添加评论

Mac RAM 套件
加速你的Mac。充分利用它的内存。
Mac RAM 套件
从Mac中清理出更多内存。
Locate and unplug the black component of the antenna from the motherboard.
  • Locate and unplug the black component of the antenna from the motherboard.

  • Under the black component should be a blue component. Unscrew this component in order to free the antenna.

添加评论

Slide the antenna out of the green tubing and slide the green tubing out of it's corresponding hole on the motherboard.
  • Slide the antenna out of the green tubing and slide the green tubing out of it's corresponding hole on the motherboard.

添加评论

Lift the motherboard out of its location in the front casing.
  • Lift the motherboard out of its location in the front casing.

  • Do this slowly and gently so that none of the motherboard's components are damaged.

添加评论

With your new motherboard, hold the LCD side of the motherboard face down. Align the four clips on the front casing with the four notches on the motherboard.
  • With your new motherboard, hold the LCD side of the motherboard face down. Align the four clips on the front casing with the four notches on the motherboard.

  • While doing so, insert the LCD into the compartment in the front casing.

添加评论

Press firmly on the motherboard until it is snug inside the casing.
  • Press firmly on the motherboard until it is snug inside the casing.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Andrew Lam

于2012年04月17日注册

28 信誉积分

创作了5篇指南

团队

Cal Poly, Team 9-46, Regan Spring 2012 Cal Poly, Team 9-46, Regan Spring 2012 的会员

CPSU-REGAN-S12S9G46

5 名成员

创作了8篇指南

Nice, thanks.

Daniel - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 7

总计 2,334