简介

Use this guide to replace the LCD in your Motorola C350.

  1. Use your finger to press the button and free the device rear case.
    • Use your finger to press the button and free the device rear case.

    • You may have to force it a bit more to free its bottom if you open it for the first time.

    添加评论

  2. slide the black button to free the battery so you can grab it with your other hand.
    • slide the black button to free the battery so you can grab it with your other hand.

    添加评论

    • You will see one plastic clip on each side of the device. Use your thumbs to push them apart and being able to separate the front case from the device other components.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the 4 T6 Torx screws

    添加评论

    • Use a metal spudger to pell off the four metal clips and separate the motherboard and keyboard from the main plastic part.

    添加评论

    • The last thing you need to doto access the Logic Board is to separate the Keyboard/Screen block just taking apart with your fingers.

    添加评论

    • Remove the two small metal clips keeping the cables safe.

    添加评论

    • Use a plastic spudger to pell off the two cables on the back side of the screen.

    • There are two very small connectors. Take care of them and replace them if they incidentally fall.

    添加评论

    • Use a plastic spudger to release the disconnected screen.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Vincent Monteil

于2013年07月06日注册

6,197 信誉积分

创作了19篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 451