简介

The glass covering on mobile devices can be prone to damage and constant wear and tear. The Motorola Adventure V750 has a very moderate process in replacing the front protection screen.

配件

无需配件。

    • Remove the back cover and battery of the Motorola Adventure V750.

    添加评论

    • Remove four screws that are visible using a screwdriver.

    添加评论

    • After removing the battery chamber, you can unclip one of the ribbons that connect the screen to the main body of the phone. This divides the phone into two halves.

    添加评论

  1. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove two screws located at the bottom of the main display.

    添加评论

    • Now the display(screen) can be removed by sliding a sharp object or fingernail along the edge of the housing. This releases the clip attached to the screen.

    添加评论

    • Release the display up to the point where you see two metal parts (left and right of the Motorola text). The top part of the display is held on with double sided tape.

    添加评论

    • Gently unstick the tape and remove the display. Be careful not to bend this part.

    添加评论

    • Carefully install the new glass.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Kyle

于2012年10月01日注册

572 信誉积分

创作了5篇指南

团队

University of Maine, Team 1-2, Diaz Fall 2012 University of Maine, Team 1-2, Diaz Fall 2012 的会员

UMAINE-DIAZ-F12S1G2

3 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 557