Moto X Pure Edition Back Panel Removal - iFixit 维修指南

简介

This is an old version of this guide. See the new version for the most up-to-date process.

你所需要的

步骤 1 Back Panel

Moto X Pure Edition Back Panel Removal, Back Panel: 步骤 1 中的图像 1，3

Moto X Pure Edition Back Panel Removal, Back Panel: 步骤 1 中的图像 2，3

Moto X Pure Edition Back Panel Removal, Back Panel: 步骤 1 中的图像 3，3

Disconnect the two battery connections.
Remove the two parallel black tabs by pulling on them.

步骤 2

Moto X Pure Edition Back Panel Removal: 步骤 2 中的图像 1，3

Moto X Pure Edition Back Panel Removal: 步骤 2 中的图像 2，3

Moto X Pure Edition Back Panel Removal: 步骤 2 中的图像 3，3

All screw lengths are 2.5mm
Using the T3 screw driver, remove all 20 T3 screws.
Do NOT remove the silver screw circled in orange.
This holds in the Power/Volume buttons and is not necessary to remove. There are 2 very tiny springs behind the volume buttons that are easy to lose if you remove this screw.
Using the nylon spudger, remove the two clips holding the panel in place.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与7其他贡献者

Lucas Dos Santos

于03/06/16注册

1,053 声望

创作了5篇指南

+ 12更多徽章

团队

UMass Dartmouth, Team 5-2, Landers Spring 2016 UMass Dartmouth, Team 5-2, Landers Spring 2016 的会员

UMASSD-LANDERS-S16S5G2

3 名成员

创作了15篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 148