简介

If the buttons on the front of the device aren't responding, you may have a faulty button board. Follow the instructions below to replace your button board.

配件

无需配件。

  1. Turn the device so the screen is facing down.
    • Turn the device so the screen is facing down.

  2. Slide the battery lock switch next to the power slider to the unlocked position. Slide the battery lock switch next to the power slider to the unlocked position.
    • Slide the battery lock switch next to the power slider to the unlocked position.

  3. Slide and hold the switch by the fan vent to the unlocked position. Firmly grasp the battery and pull away from tablet. When replacing the battery, place the end near the fan vent in first. Make sure to keep the other switch in the unlocked position while pushing the battery into place. When replacing the battery, place the end near the fan vent in first. Make sure to keep the other switch in the unlocked position while pushing the battery into place.
    • Slide and hold the switch by the fan vent to the unlocked position. Firmly grasp the battery and pull away from tablet.

    • When replacing the battery, place the end near the fan vent in first. Make sure to keep the other switch in the unlocked position while pushing the battery into place.

  4. Unscrew hard drive panel using a Phillips head #1 screwdriver.
    • Unscrew hard drive panel using a Phillips head #1 screwdriver.

    • (Our device was not given to us with a hard drive or a hard drive panel)

  5. Pull clear plastic tab to detach hard drive from tablet. Pull clear plastic tab to detach hard drive from tablet. Pull clear plastic tab to detach hard drive from tablet.
    • Pull clear plastic tab to detach hard drive from tablet.

  6. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  7. To disconnect the three white ribbon cables on the side closest to the hard drive connector, pull the white plastic tabs. To disconnect the three white ribbon cables on the side closest to the hard drive connector, pull the white plastic tabs.
    • To disconnect the three white ribbon cables on the side closest to the hard drive connector, pull the white plastic tabs.

  8. Pull the brown tabs to disconnect the white ribbon cable on the other side.
    • Pull the brown tabs to disconnect the white ribbon cable on the other side.

  9. Caution: do not pull on the wires, instead pull from the plastic connectors. To disconnect the remaining ribbon cables, pull the plastic connectors away from their connections.
    • Caution: do not pull on the wires, instead pull from the plastic connectors.

    • To disconnect the remaining ribbon cables, pull the plastic connectors away from their connections.

  10. With a Phillips #1 screwdriver, Unscrew the nine 10mm screws holding the case together.
    • With a Phillips #1 screwdriver, Unscrew the nine 10mm screws holding the case together.

  11. Using a spudger, press in the five tabs on the side where the battery was. This should separate the two halves of the device. Carefully set the side with the motherboard off to the side.
    • Using a spudger, press in the five tabs on the side where the battery was.

    • This should separate the two halves of the device. Carefully set the side with the motherboard off to the side.

  12. Unplug the three ribbon cables by pulling on the brown tabs and unplugging cable. Unplug the three ribbon cables by pulling on the brown tabs and unplugging cable.
    • Unplug the three ribbon cables by pulling on the brown tabs and unplugging cable.

  13. With a Phillips #1 screwdriver, unscrew the three 4mm screws holding the display bracket on the back side of the front buttons. With a Phillips #1 screwdriver, unscrew the three 4mm screws holding the display bracket on the back side of the front buttons.
    • With a Phillips #1 screwdriver, unscrew the three 4mm screws holding the display bracket on the back side of the front buttons.

  14. Remove the button board and replace. Remove the button board and replace.
    • Remove the button board and replace.

结论

To reassemble your device, follow these instructions in reverse order.

Fred Wilby

于2012年04月03日注册

67 信誉积分

撰写一个指南

团队

Cal Poly, Team 15-14, Forte Spring 2012 Cal Poly, Team 15-14, Forte Spring 2012 的会员

CPSU-FORTE-S12S15G14

5 名成员

创作了5篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 1,621