简介

If the wireless Bluetooth for the LE1600 does not work, you may need to replace it. This guide will take you through the steps to replace the Bluetooth module for your LE1600.

配件

无需配件。

  1. Turn the device so the screen is facing down.
    • Turn the device so the screen is facing down.

    添加评论

  2. Slide the battery lock switch next to the power slider to the unlocked position.
    • Slide the battery lock switch next to the power slider to the unlocked position.

    添加评论

    • Slide and hold the switch by the fan vent to the unlocked position. Firmly grasp the battery and pull away from tablet.

    • When replacing the battery, place the end near the fan vent in first. Make sure to keep the other switch in the unlocked position while pushing the battery into place.

    添加评论

    • Unscrew hard drive panel using a Phillips head #1 screwdriver.

    • (Our device was not given to us with a hard drive or a hard drive panel)

    添加评论

  3. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • Pull clear plastic tab to detach hard drive from tablet.

    添加评论

    • To disconnect the three white ribbon cables on the side closest to the hard drive connector, pull the white plastic tabs.

    添加评论

    • Pull the brown tabs to disconnect the white ribbon cable on the other side.

    添加评论

    • Caution: do not pull on the wires, instead pull from the plastic connectors.

    • To disconnect the remaining ribbon cables, pull the plastic connectors away from their connections.

    添加评论

    • With a Phillips #1 screwdriver, Unscrew the nine 10mm screws holding the case together.

    添加评论

    • Using a spudger, press in the five tabs on the side where the battery was.

    • This should separate the two halves of the device. Carefully set the side with the display off to the side.

    添加评论

    • Locate the Bluetooth board.

    • Disconnect the ribbon cable by pulling on the plastic connector.

    添加评论

    • Unscrew the 4mm screw holding the board onto the tablet.

    • Lift the board out of the tablet and carefully set it aside.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

David Troy

于2012年04月04日注册

44 信誉积分

创作了3篇指南

团队

Cal Poly, Team 15-14, Forte Spring 2012 Cal Poly, Team 15-14, Forte Spring 2012 的会员

CPSU-FORTE-S12S15G14

5 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 8

过去的30天: 16

总计 1,969