Skip to main content
  1. Start off by unpeeling the black display cover over the sensor board.
    • Start off by unpeeling the black display cover over the sensor board.

    • Do not worry, the display board will re-stick when reassembling.

  2. Unscrew the two 3mm Torx Security #6 screws on the edge of the device. Unscrew the two 5mm Torx Security #10 in the middle of the device.
    • Unscrew the two 3mm Torx Security #6 screws on the edge of the device.

    • Unscrew the two 5mm Torx Security #10 in the middle of the device.

  3. Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

    Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物
  4. Lay the device on its back and unpeel the silicone base. Unscrew the four 5mm Torx Security #10 at base. Unscrew the four 5mm Torx Security #10 at base.
    • Lay the device on its back and unpeel the silicone base.

    • Unscrew the four 5mm Torx Security #10 at base.

  5. Gently remove the metal screen. Gently remove the metal screen.
    • Gently remove the metal screen.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Akshar Patel

于2016年09月12日注册

228 Reputation

撰写一个指南

Team

CSU Fullerton, Team 2-6, Bruce Fall 2016 CSU Fullerton, Team 2-6, Bruce Fall 2016 的会员

CSUF-BRUCE-F16S2G6

4 名成员

创作了4篇指南

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 6

All Time: 253