跳转到主内容

配件

没有特定配件。

  1. Remove one 7 mm Torx  security  screw from the top left corner and two 5 mm  Torx security screws from the bottom left and top right corners of the circuit board. Remove one 7 mm Torx  security  screw from the top left corner and two 5 mm  Torx security screws from the bottom left and top right corners of the circuit board.
    • Remove one 7 mm Torx security screw from the top left corner and two 5 mm Torx security screws from the bottom left and top right corners of the circuit board.

  2. Solder the two wires connecting the circuit board to the motherboard. Solder the two wires connecting the circuit board to the motherboard.
    • Solder the two wires connecting the circuit board to the motherboard.

  3. Remove the two circuit wires by gently tugging on them. Remove the two circuit wires by gently tugging on them.
    • Remove the two circuit wires by gently tugging on them.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Heather Carrillo

于2016年09月12日注册

364 信誉积分

创作了2篇指南

团队

CSU Fullerton, Team 2-6, Bruce Fall 2016 CSU Fullerton, Team 2-6, Bruce Fall 2016 的会员

CSUF-BRUCE-F16S2G6

4 名成员

创作了4篇指南

Monster Soundstage circuit board supplier?

Bill Wishart - 回复

@heather57 Monster Soundstage circuit board supplier?

Bill Wishart - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 8

总计 291