Model-V2945Z Cordless Shark Floor and Carpet Sweeper-Rotating Brush Replacement

简介

This guide's intent is to provide instructions on how to fix this model of Shark Vacuum, by replacing a broken rotating brush. Its purpose is to educate viewers on how to do this simple repair. The detailed step-by-step instructions include hands-on illustrations throughout the process for this fix. The guide provides the quick, simple steps to locate and remove the brush for replacement. This guide saves viewers money from buying a new Shark Vacuum, by demonstrating how to fix their own.

你所需要的

步骤 1 Replacing a Rotating Brush

Model-V2945Z Cordless Shark Floor and Carpet Sweeper-Rotating Brush Replacement, Replacing a Rotating Brush: 步骤 1 中的图像 1，1

Turn vacuum off before starting the fix.
Power-off vacuum by pressing the button on the left-rear side of vacuum until the red light is off.
Lay vacuum down with handle lying flat on the floor.

翻译

步骤 2

Remove and empty dust tray; make sure to clean any debris built up.
Lay vacuum up-side-down, locating the broken brush.

翻译

步骤 3

Turn the lock counter-clockwise to unlock access to the rotation brush; use a key or flathead screwdriver to fit the lock.
Remove the square brush cover to access the rotation brush.
Once unlocked, the small square brush holder will detach.

翻译

步骤 4

Remove the large band from the rotation brush.
Push the band to the side and lift up the right-side of the brush.

翻译

步骤 5

Detach left-side of the brush from the vacuum.

翻译

步骤 6

Use scissors to cut away any debris entangled in the brush.
The brush is easily damaged by debris if not cleaned regularly; keeping the brush clean lengthens the life of the vacuum.
Clean the area surrounding the brush by scraping with a putty knife before inserting the replacement brush.