简介

This short, simple guide will help you replace the rubber keyboard buttons on a Mitsubishi T200 cellphone.

  1. Begin disassembling the phone by removing the back of the phone and the battery.
    • Begin disassembling the phone by removing the back of the phone and the battery.

    添加评论

  2. Remove the back plate by removing the 4 screws in the back plate using an appropriately sized Philips screwdriver
    • Remove the back plate by removing the 4 screws in the back plate using an appropriately sized Philips screwdriver

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Pry the font plastic component from the “motherboard” component.

    添加评论

    • Take out the old rubber keypad and replace with a new one.

    添加评论

    • Reassemble by following previous steps in reverse order.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Katherine

于2014年02月13日注册

22 信誉积分

撰写一个指南

团队

Ohio State, Team 1-5, Meza Spring 2014 Ohio State, Team 1-5, Meza Spring 2014 的会员

OSU-MEZA-S14S1G5

4 名成员

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 4

总计 494