修复你的物品 社区 商店

Minolta QTsi Maxxum Shutter Button Replacement

简介

Replace your broken shutter release button so that you can take pictures with your camera.

你所需要的

  1. Minolta QTsi Maxxum Shutter Button Replacement, Shutter Button: 步骤 1 中的图像 1，1

    • Locate the battery compartment on the bottom panel of the camera.

    • Open the battery door by using a coin.

    • In the counterclockwise direction, twist the coin in the battery door groove to open it.

    编辑

  2. Minolta QTsi Maxxum Shutter Button Replacement: 步骤 2 中的图像 1，1

    • Two batteries are located inside the battery chamber.

    • Remove the two batteries from the battery chamber by picking them up.

    编辑

  3. Minolta QTsi Maxxum Shutter Button Replacement: 步骤 3 中的图像 1，1

    • There is a screw located underneath the batteries in the battery compartment.

    • Unscrew and remove the (1) black Phillips #00 5mm screw from the battery compartment.

    • Ensure good lighting before attempting to remove this screw because it is hard to see inside the compartment.

    编辑

  5. Minolta QTsi Maxxum Shutter Button Replacement: 步骤 4 中的图像 1，1

    • From underneath the flash assembly, remove the (1) black Phillips #00 5mm screw

    • Be careful because you can lose the screw

    编辑

  6. Minolta QTsi Maxxum Shutter Button Replacement: 步骤 5 中的图像 1，1

    • The only screws remaining that hold the top panel of the camera in place are located next to the view finder.

    • Remove the (2) black Phillips #00 5mm screws from both sides of the view finder.

    • Be careful because you can lose the screw

    编辑

  7. Minolta QTsi Maxxum Shutter Button Replacement: 步骤 6 中的图像 1，2 Minolta QTsi Maxxum Shutter Button Replacement: 步骤 6 中的图像 2，2

    • The top panel of the camera should now be easy to lift off. If it is not, make sure that all screws and attachments, listed in steps 1-5, have been removed.

    • Once all screws are removed, lift the top panel from the camera.

    • Be careful when removing the top panel because there are wires connected to it.

    编辑

  8. Minolta QTsi Maxxum Shutter Button Replacement: 步骤 7 中的图像 1，1

    • Use a metal spudger to push the button out of its socket so that you can place a new one in its place.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与4其他贡献者

Jordan Ellery

于10/10/16注册

388 声望

创作了3篇指南

徽章: 9

+ 6更多徽章

团队

Sam Houston State, Team 12-4, Blackburne Fall 2016 Sam Houston State, Team 12-4, Blackburne Fall 2016 的会员

SHSU-BLACKBURNE-F16S12G4

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 4

总计 479