修复你的物品 社区 商店

Minolta Maxxum QTSI Tripod Mount Replacement

简介

If you are unable to mount your camera to a tripod, the tripod socket could be broken and may need to be replaced.

你所需要的

  1. Minolta Maxxum QTSI Tripod Mount Replacement, Tripod Mount: 步骤 1 中的图像 1，1

    • With a screwdriver, remove the (7) black Phillips #00 5.0mm screws on the bottom of the camera.

    • The screws are located on the outer edge of the bottom panel.

    • Be careful when removing the screws from the panel because they are easy to lose.

    编辑

  2. Minolta Maxxum QTSI Tripod Mount Replacement: 步骤 2 中的图像 1，2 Minolta Maxxum QTSI Tripod Mount Replacement: 步骤 2 中的图像 2，2

    • Once all the screws are removed, the panel should easily come off.

    • Remove the bottom panel of the camera by placing your index finger and thumb on the outer edges of the panel.

    • Pull the bottom panel towards you, it should come off easily.

    编辑

  4. Minolta Maxxum QTSI Tripod Mount Replacement: 步骤 3 中的图像 1，1

    • The tripod socket is visible when the bottom panel is removed.

    • Remove the (3) black Phillips #00 6.25mm screws from the tripod socket.

    • When the screws are removed, the tripod socket is free and can easily be lost.

    编辑

  5. Minolta Maxxum QTSI Tripod Mount Replacement: 步骤 4 中的图像 1，2 Minolta Maxxum QTSI Tripod Mount Replacement: 步骤 4 中的图像 2，2

    • Use the tweezers to gently remove the tripod socket, and replace it.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Jordan Ellery

于10/10/16注册

388 声望

创作了3篇指南

徽章: 9

+ 6更多徽章

团队

Sam Houston State, Team 12-4, Blackburne Fall 2016 Sam Houston State, Team 12-4, Blackburne Fall 2016 的会员

SHSU-BLACKBURNE-F16S12G4

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 3

总计 352