修复你的物品 社区 商店

Minolta Dimage Xt Flash Capacitor Replacement

简介

In the event that the flash is not working properly due to internal issues and not settings, it is possible to replace the capacitor to restore function to the flash.

你所需要的

  1. Minolta Dimage Xt Flash Capacitor Replacement, Casing: 步骤 1 中的图像 1，3 Minolta Dimage Xt Flash Capacitor Replacement, Casing: 步骤 1 中的图像 2，3 Minolta Dimage Xt Flash Capacitor Replacement, Casing: 步骤 1 中的图像 3，3

    • Locate and remove the silver screws on each side of the camera.

    • Use the Phillips #00 Screwdriver to unscrew all 2.0mm (4 instances) and 4.0mm (2 instances) screws.

    翻译

  3. Minolta Dimage Xt Flash Capacitor Replacement: 步骤 2 中的图像 1，3 Minolta Dimage Xt Flash Capacitor Replacement: 步骤 2 中的图像 2，3 Minolta Dimage Xt Flash Capacitor Replacement: 步骤 2 中的图像 3，3

    • Then, carefully pry apart the front and back outer casing away from the internal components.

    • Be aware of the ribbon wire that will disconnect when the casing is detached.

    翻译

  4. Minolta Dimage Xt Flash Capacitor Replacement, Flash Capacitor: 步骤 3 中的图像 1，2 Minolta Dimage Xt Flash Capacitor Replacement, Flash Capacitor: 步骤 3 中的图像 2，2

    • Caution: Touching the capacitor leads may cause serious injury. Use a capacitor discharge probe to safely rid the capacitors of dangerous charges.

    • On the front side of the camera, locate the flash battery holder.

    • Lift the housing and remove the battery.

    • After removing the battery, clip the wires and solder the replacement battery.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与4其他贡献者

Qqq

于03/11/13注册

19 声望

撰写一个指南

徽章: 5

+ 2更多徽章

一条评论

Its a cap not a battery :D

Eigirdas Gedgaudas - 回复

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 3

过去 30 天： 7

总计 989