跳转到主内容

Fix Your Stuff

Right to Repair

Parts & Tools

简介

In the event that the battery needs to be replaced it is necessary to follow the steps of this guide to achieve this goal.

  1. Locate the latch labeled BATT SD CARD on the right side of the camera. Push the latch in the direction of the arrow, and it will spring open.
    • Locate the latch labeled BATT SD CARD on the right side of the camera.

    • Push the latch in the direction of the arrow, and it will spring open.

  2. Insert the battery into the larger slot until the gray tab (circled in red) clicks and secures the battery.
    • Insert the battery into the larger slot until the gray tab (circled in red) clicks and secures the battery.

    • To remove the battery, pull the gray tab back until the battery springs free.

结论

When the battery has been removed/inserted, push the latch down, and it will lock into place.

另外一个人完成了本指南。

Megan Milam

于2013年03月11日注册

28 信誉积分

创作了5篇指南

团队

Clemson, Team 12-4, Benson Spring 2013 Clemson, Team 12-4, Benson Spring 2013 的会员

CLEM-BENSON-S13S12G4

3 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 5

总计 590