修复你的物品 社区 商店

Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement

简介

The following repair guide shows how to remove and replace the directional switch in a Milwaukee Hex Impact Driver 2750-20.

你所需要的

  1. Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement, Outer Casing: 步骤 1 中的图像 1，1

    • Remove the five T9 15.5 mm screws.

    • Remove the single T9 19.5mm screw.

    • Remove the two T9 37mm screws.

    编辑

  3. Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement: 步骤 2 中的图像 1，1

    • Remove the drill casing to expose the drill's interior parts.

    编辑

  4. Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement, Directional Switch: 步骤 3 中的图像 1，3 Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement, Directional Switch: 步骤 3 中的图像 2，3 Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement, Directional Switch: 步骤 3 中的图像 3，3
    在这个步骤中使用的工具：
    Tweezers
    $4.99
    购买

    • Remove the trigger assembly completely.

    • Remove the directional switch by lifting upward using a pair of tweezers, clearing the alignment pole on the trigger assembly.

    • Insert a new directional switch by aligning the hole on the switch with the pole on the trigger.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 6

过去 30 天： 19

总计 936