修复你的物品 社区 商店

Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement

简介

The following repair guide shows how to remove and replace the chuck drive shaft in a Milwaukee Hex Impact Driver 2750-20.

你所需要的

  1. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Outer Casing: 步骤 1 中的图像 1，1

    • Remove the five T9 15.5 mm screws.

    • Remove the single T9 19.5mm screw.

    • Remove the two T9 37mm screws.

    编辑

  2. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement: 步骤 2 中的图像 1，1

    • Remove the drill casing to expose the drill's interior parts.

    编辑

  4. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Chuck Drive Shaft: 步骤 3 中的图像 1，3 Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Chuck Drive Shaft: 步骤 3 中的图像 2，3 Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Chuck Drive Shaft: 步骤 3 中的图像 3，3

    • Pulling directly outward, remove the driver head from the motor assembly by picking it up out of the casing.

    编辑

  5. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement: 步骤 4 中的图像 1，1

    • Remove the drive shaft assembly from the motor coils.

    • There will be resistance when removing the drive shaft as there is magnetism working against you.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 7

总计 750