修复你的物品 社区 商店

Milwaukee Hex Impact Driver 2750-20 Output Shaft Bearing Replacement

简介

The following repair guide shows how to remove and replace the output shaft bearing in an Milwaukee Hex Impact Driver 2750-20.

你所需要的

  1. Milwaukee Hex Impact Driver 2750-20 Output Shaft Bearing Replacement, Outer Casing: 步骤 1 中的图像 1，1

    • Remove the five T9 15.5 mm screws.

    • Remove the single T9 19.5mm screw.

    • Remove the two T9 37mm screws.

    编辑

  2. Milwaukee Hex Impact Driver 2750-20 Output Shaft Bearing Replacement: 步骤 2 中的图像 1，1

    • Remove the drill casing to expose the drill's interior parts.

    编辑

  4. Milwaukee Hex Impact Driver 2750-20 Output Shaft Bearing Replacement, Output Shaft Bearing: 步骤 3 中的图像 1，1

    • Once the interior is open locate the output shaft driver pictured at the left of the screen.

    编辑

  5. Milwaukee Hex Impact Driver 2750-20 Output Shaft Bearing Replacement: 步骤 4 中的图像 1，3 Milwaukee Hex Impact Driver 2750-20 Output Shaft Bearing Replacement: 步骤 4 中的图像 2，3 Milwaukee Hex Impact Driver 2750-20 Output Shaft Bearing Replacement: 步骤 4 中的图像 3，3

    • Lift the driver head and motor assembly directly out of the outer casing.

    • Pull the driver head away from the motor assembly, separating the two.

    编辑

  6. Milwaukee Hex Impact Driver 2750-20 Output Shaft Bearing Replacement: 步骤 5 中的图像 1，3 Milwaukee Hex Impact Driver 2750-20 Output Shaft Bearing Replacement: 步骤 5 中的图像 2，3 Milwaukee Hex Impact Driver 2750-20 Output Shaft Bearing Replacement: 步骤 5 中的图像 3，3
    在这个步骤中使用的工具：
    Tweezers
    $4.99
    购买

    • Remove the fan and the drive shaft assembly from the motor core assembly.

    • Using a pair of tweezers, remove the retaining ring.

    • Remove the old bearing and reinstall the new retaining clip.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 10

总计 588