Milwaukee 5262-21 Power Cord Replacement

简介

In this guide, we will be replacing a power cord that is not supplying power to your device. You will be replacing a power cord, that is typically common to become faulty on this device. You will be removing 4 bolts.

你所需要的

步骤 1 Housing Assembly

Milwaukee 5262-21 Power Cord Replacement, Housing Assembly: 步骤 1 中的图像 1，1

Remove the ten 19mm T20 Torx screws shown in red.

编辑

步骤 2

Remove the red Housing Assembly by lifting it up off of the tool.

编辑

步骤 3 Power Cord

Milwaukee 5262-21 Power Cord Replacement, Power Cord: 步骤 3 中的图像 1，2

Milwaukee 5262-21 Power Cord Replacement, Power Cord: 步骤 3 中的图像 2，2

Remove the two 11.5mm T-15 screws shown in red.

编辑

步骤 4

Milwaukee 5262-21 Power Cord Replacement: 步骤 4 中的图像 3，3

Follow the black and white cord to the trigger.
On the trigger there are two small bolts that you have to loosen.
Loosen them slightly with a H - 1.5 bit.

编辑

步骤 5

Milwaukee 5262-21 Power Cord Replacement: 步骤 5 中的图像 3，3

Once the bolts are loose you can pull both cords straight out from the trigger.
Pull the cable from the chassis and put it to the side and it has been successfully removed.

编辑