Milwaukee 5262-21 Diaphragm Assembly with Bushing Replacement

简介

This guide will show you how to replace the diaphragm assembly. A faulty diaphragm assembly can lead to a few different issues including irregular shaking, grinding, or leaking grease.

你所需要的

步骤 1 Housing Assembly

Milwaukee 5262-21 Diaphragm Assembly with Bushing Replacement, Housing Assembly: 步骤 1 中的图像 1，1

Remove the ten 19mm T20 Torx screws shown in red.

编辑

步骤 2

Remove the red Housing Assembly by lifting it up off of the tool.

编辑

步骤 3 Reduction Gear Assembly

Milwaukee 5262-21 Diaphragm Assembly with Bushing Replacement, Reduction Gear Assembly: 步骤 3 中的图像 1，2

Milwaukee 5262-21 Diaphragm Assembly with Bushing Replacement, Reduction Gear Assembly: 步骤 3 中的图像 2，2

Remove the two 10mm T-10 Torx screws that attach the top brush holders to the motor housing.
Remove the two 10mm T-10 Torx screws that attach the bottom brush holders to the motor housing.

编辑

步骤 4

Using a metal spudger, pry off each brush holder.

编辑

步骤 5

Milwaukee 5262-21 Diaphragm Assembly with Bushing Replacement: 步骤 5 中的图像 3，3

Remove the four 37mm T20 Torx screws shown in red.

编辑

步骤 6

Pull the front portion of the tool out from the motor housing.

编辑

步骤 7

Milwaukee 5262-21 Diaphragm Assembly with Bushing Replacement: 步骤 7 中的图像 3，3

Remove the two 11.5mm T10 Torx screws shown in red.

编辑

步骤 8

Pull the 120V armature assembly out of the diaphragm assembly.

编辑

步骤 9

Using a metal spudger, pry the diaphgram assembly out of the gear case.

编辑

步骤 10

Now that you have loosened the diaphragm, you can now pull it out of the gear case.

编辑

步骤 11

Milwaukee 5262-21 Diaphragm Assembly with Bushing Replacement: 步骤 11 中的图像 3，3

The diaphragm assembly will be lathered in grease. In order to move forward, you may want to give it a wipe down to remove any extra grease.
After removing some grease (if needed), remove the two 15mm T20 Torx screws shown in red.

编辑