简介

It will be necessary to solder the wire connection in order to properly complete this installation.

Remove the old or broken circuit board from the front case.
  • Remove the old or broken circuit board from the front case.

  • Clip the red and black wires at the base of the motherboard to completely separate it from the radio case.

添加评论

Mac RAM 套件
加速你的Mac。充分利用它的内存。
Mac RAM 套件
从Mac中清理出更多内存。
Reattach the speaker wires and antenna to the new circuit board using a soldering iron.  Take caution when using the hot soldering tool!
  • Reattach the speaker wires and antenna to the new circuit board using a soldering iron. Take caution when using the hot soldering tool!

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

James Tucker Dunn

于2013年01月18日注册

371 信誉积分

创作了6篇指南

团队

Cal Poly, Team 19-43, Regan Winter 2013 Cal Poly, Team 19-43, Regan Winter 2013 的会员

CPSU-REGAN-W13S19G43

3 名成员

创作了9篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 6

总计 916