跳转到主内容

Microsoft Lumia 535 Logic board Replacement

你所需要的

视频概述

  1. Microsoft Lumia 535 Logic board Replacement, Back Cover / Rear Case: 步骤 1 中的图像 1,2 Microsoft Lumia 535 Logic board Replacement, Back Cover / Rear Case: 步骤 1 中的图像 2,2
    • Turn off the phone.

    • Remove the battery and any SIM and memory cards.

  2. Microsoft Lumia 535 Logic board Replacement: 步骤 2 中的图像 1,2 Microsoft Lumia 535 Logic board Replacement: 步骤 2 中的图像 2,2
    • With a screwdriver Torx T4 remove the 9x screws.

  3. Microsoft Lumia 535 Logic board Replacement: 步骤 3 中的图像 1,3 Microsoft Lumia 535 Logic board Replacement: 步骤 3 中的图像 2,3 Microsoft Lumia 535 Logic board Replacement: 步骤 3 中的图像 3,3
    • With a plastic opening tool separate the back cover from the middle frame.

  4. Microsoft Lumia 535 Logic board Replacement, Logic board: 步骤 4 中的图像 1,3 Microsoft Lumia 535 Logic board Replacement, Logic board: 步骤 4 中的图像 2,3 Microsoft Lumia 535 Logic board Replacement, Logic board: 步骤 4 中的图像 3,3
    • Disconnect:

    • Touch screen flex cable

    • LCD Display flex cable

    • Charging Dock board flex cable - remove the foam and tape, then flip up the black lock before easing out the flex.

    • Coaxial antena cable - take your time here, be sure to pull the metal connector and not the cable or you risk pulling the cable from the connector.

    • Remove the 2x Torx T4 screws.

    Take care when removing the coax connector. Mine was very tight and I managed to disconnect the coax cable from the connector. Phone is now in the bin :-(

    keithellis - 回复

    Also, when removing the charging dock board flex cable, the connector has a black lock arm. Remove the foam pad and tape to reveal the lock. Gently ease the lock arm up then ease the flex out.

    keithellis - 回复

  5. Microsoft Lumia 535 Logic board Replacement: 步骤 5 中的图像 1,3 Microsoft Lumia 535 Logic board Replacement: 步骤 5 中的图像 2,3 Microsoft Lumia 535 Logic board Replacement: 步骤 5 中的图像 3,3
    • Insert wisdom here.

    With the camera/logic board removed then don’t forget to remove the other end of the charging dock board flex cable from the charging board. When reassembling I found it awkward to hold the protective black guard over the flex out of the way when sliding the end of the ribbon into the replaced charging dock board: combination of tweezers and fingernail required.

    Thomas Goodfellow - 回复

结论

To reassemble your device, follow these instructions in reverse order.

8等其他人完成本指南。

ZFix

于12/09/13注册

191,055 声望

创作了330篇指南

团队

Master Techs Master Techs 的会员

Community

322 名成员

创作了2,506篇指南

4条评论

How can I add additional sensors- the gyroscope & compass chips on this logic board?

Abinash Pal - 回复

microsoft lumia 535 chargeing ic complete

Sunitha Kunapareddi - 回复

my Microsoft lumia 535 chargeing ic complient main mother board lo problem

Sunitha Kunapareddi - 回复

My microsoft mobile 1090 is not displaying apps but on backlight

Please what can I do to it?

aribasoyeifeoluwa - 回复

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 2

过去 30 天: 5

总计 5,920