修复你的物品 社区 商店

MerchSource the Black Series Boat Racer Gaskets Replacement

简介

This repair guide will show you how to replace the gaskets in the MerchSource the Black Series Boat Racers toy boat. The gaskets are foam pieces that secure the battery compartment in the boat from water leakage.

你所需要的

  1. MerchSource the Black Series Boat Racer Gaskets Replacement, Gaskets: 步骤 1 中的图像 1，2 MerchSource the Black Series Boat Racer Gaskets Replacement, Gaskets: 步骤 1 中的图像 2，2

    • Remove the screw on the top of the boat at the rear end using a Phillips #2 screwdriver.

    • Screw length is 16 mm.

    编辑

  2. MerchSource the Black Series Boat Racer Gaskets Replacement: 步骤 2 中的图像 1，3 MerchSource the Black Series Boat Racer Gaskets Replacement: 步骤 2 中的图像 2，3 MerchSource the Black Series Boat Racer Gaskets Replacement: 步骤 2 中的图像 3，3

    • Remove the top of the boat by sliding it backwards and then pulling it off.

    编辑

  4. MerchSource the Black Series Boat Racer Gaskets Replacement: 步骤 3 中的图像 1，2 MerchSource the Black Series Boat Racer Gaskets Replacement: 步骤 3 中的图像 2，2

    • Grab the rubber gasket with tweezers and pull it out of the slot.

    编辑

  5. MerchSource the Black Series Boat Racer Gaskets Replacement: 步骤 4 中的图像 1，3 MerchSource the Black Series Boat Racer Gaskets Replacement: 步骤 4 中的图像 2，3 MerchSource the Black Series Boat Racer Gaskets Replacement: 步骤 4 中的图像 3，3

    • Gently remove the gasket and replace with a new one.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 1

总计 258