修复你的物品 社区 商店

Megawheels S10 Rear Mudguard Replacement

简介

This guide will go over the steps for replacing the rear mudguard on a Megawheels S10 electric scooter.

The mudguard serves as a manual brake for the scooter as well as providing a tail light, so when this piece has taken too much damage or stops working, it removes an important function to your scooter.

The process for this replacement is simple and does not require a lot of experience or prior information in order to complete.

你所需要的

  1. Megawheels S10 Rear Mudguard Replacement, Rear Mudguard: 步骤 1 中的图像 1，1

    • Hold down the power button and wait for a beep to ensure that the scooter is turned off.

    编辑

  2. Megawheels S10 Rear Mudguard Replacement: 步骤 2 中的图像 1，1

    • Put up the kickstand so that the scooter is upright.

    编辑

  3. Megawheels S10 Rear Mudguard Replacement: 步骤 3 中的图像 1，1

    • Unscrew the old mudguard.

    编辑

  5. Megawheels S10 Rear Mudguard Replacement: 步骤 4 中的图像 1，1

    • Grip the wheel and pull off the mudguard.

    编辑

  6. Megawheels S10 Rear Mudguard Replacement: 步骤 5 中的图像 1，1

    • Remove the connector.

    编辑

  7. Megawheels S10 Rear Mudguard Replacement: 步骤 6 中的图像 1，1

    • Attach the new mudguard's power connector.

    编辑

  8. Megawheels S10 Rear Mudguard Replacement: 步骤 7 中的图像 1，1

    • Line up the new mudguard with the screw holes and reinsert the screws.

    编辑
结论

If these steps are followed correctly, then your manual break and tail light should function good as new!

作者

与2其他贡献者

Andrew DiCapo

于09/28/21注册

145 声望

撰写一个指南

徽章: 2

团队

University of North Texas, Team 2-9, Raign Fall 2021 University of North Texas, Team 2-9, Raign Fall 2021 的会员

UNT-RAIGN-F21S2G9

2 名成员

创作了1篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 5

过去 30 天： 26

总计 1,098