修复你的物品 社区 商店

Maze Speed SSB-508 Battery Port Replacement

简介

This guide will provide you the process of replacing the battery port in a Maze Speed phone. You will need a plastic opening tool, tweezers, a Phillips #00 Screwdriver, pliers and soldering equipment. You will also need to know how to solder, in order to not damage other components. Sometimes a phone battery connector may get corroded which shortens the battery life. If this is the case, you will need to change the battery port.

你所需要的

  1. Maze Speed SSB-508 Battery Port Replacement, Motherboard: 步骤 1 中的图像 1，3 Maze Speed SSB-508 Battery Port Replacement, Motherboard: 步骤 1 中的图像 2，3 Maze Speed SSB-508 Battery Port Replacement, Motherboard: 步骤 1 中的图像 3，3

    • Remove the back cover by inserting the plastic opening tool at the bottom left corner of the device.

    编辑

  2. Maze Speed SSB-508 Battery Port Replacement: 步骤 2 中的图像 1，2 Maze Speed SSB-508 Battery Port Replacement: 步骤 2 中的图像 2，2

    • Remove fifteen 2mm Phillips #00 screws.

    编辑

  3. Maze Speed SSB-508 Battery Port Replacement: 步骤 3 中的图像 1，3 Maze Speed SSB-508 Battery Port Replacement: 步骤 3 中的图像 2，3 Maze Speed SSB-508 Battery Port Replacement: 步骤 3 中的图像 3，3

    • Lift the plastic opening tool up at the bottom left corner to create the gap.

    • Repeat this through all corners to remove the internal casing.

    编辑

  4. Maze Speed SSB-508 Battery Port Replacement: 步骤 4 中的图像 1，3 Maze Speed SSB-508 Battery Port Replacement: 步骤 4 中的图像 2，3 Maze Speed SSB-508 Battery Port Replacement: 步骤 4 中的图像 3，3

    • Unscrew the 2mm screw at the bottom right of the motherboard.

    • Remove the internal antenna casing from the motherboard.

    编辑

  6. Maze Speed SSB-508 Battery Port Replacement: 步骤 5 中的图像 1，2 Maze Speed SSB-508 Battery Port Replacement: 步骤 5 中的图像 2，2

    • Unplug the speaker at the top of the motherboard.

    编辑

  7. Maze Speed SSB-508 Battery Port Replacement: 步骤 6 中的图像 1，2 Maze Speed SSB-508 Battery Port Replacement: 步骤 6 中的图像 2，2

    • Desolder the gold ribbon that is connected to the motherboard at the bottom left corner.

    编辑

  8. Maze Speed SSB-508 Battery Port Replacement: 步骤 7 中的图像 1，3 Maze Speed SSB-508 Battery Port Replacement: 步骤 7 中的图像 2，3 Maze Speed SSB-508 Battery Port Replacement: 步骤 7 中的图像 3，3

    • Use tweezers to remove cable from the ZIF connectors located at the bottom left of the motherboard.

    • Use the tweezers to remove the second cable from ZIF connector located to the right of the speaker that you unplugged in step five.

    • ZIF connector stands for Zero Insertion Force. Flip the small locking tap before removing the cable.

    编辑

  9. Maze Speed SSB-508 Battery Port Replacement: 步骤 8 中的图像 1，2 Maze Speed SSB-508 Battery Port Replacement: 步骤 8 中的图像 2，2

    • At this point, the motherboard should be able to be lifted up from the bottom.

    • Use the tweezers to dislodge the speaker.

    • After the speaker is dislodged, flip the motherboard up so that you can see the cable.

    • Using a soldering tool, desolder the cable from the back of the motherboard.

    编辑

  10. Maze Speed SSB-508 Battery Port Replacement: 步骤 9 中的图像 1，1

    • Remove the motherboard from the back.

    编辑

  11. Maze Speed SSB-508 Battery Port Replacement, Battery Port: 步骤 10 中的图像 1，3 Maze Speed SSB-508 Battery Port Replacement, Battery Port: 步骤 10 中的图像 2，3 Maze Speed SSB-508 Battery Port Replacement, Battery Port: 步骤 10 中的图像 3，3

    • Flip the motherboard upside down and you will see the battery port connected to the motherboard with 5 different soldered places.

    • Use the pliers to hold the motherboard and desolder the 5 places which are connected to the motherboard.

    编辑

  12. Maze Speed SSB-508 Battery Port Replacement: 步骤 11 中的图像 1，1

    • Use the tweezers to pull out the battery port.

    • Then, replace it with the new battery port.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 3

过去 30 天： 16

总计 1,161