修复你的物品 加入社区 商店

MaxWest TAB-7360DC Screen Replacement

你所需要的

  1. MaxWest TAB-7360DC Screen Replacement, Back Hard Case: 步骤 1 中的图像 1，3 MaxWest TAB-7360DC Screen Replacement, Back Hard Case: 步骤 1 中的图像 2，3 MaxWest TAB-7360DC Screen Replacement, Back Hard Case: 步骤 1 中的图像 3，3

    • Insert plastic opening tool at the corner of the screen, in between the back case and the front.

    • Volume buttons will fall out during removal.

    • When opening up the case, have the I/O ports facing you and turn the back case towards the right. There is a short wire connecting the speaker to the logic board.

    编辑

  2. MaxWest TAB-7360DC Screen Replacement: 步骤 2 中的图像 1，2 MaxWest TAB-7360DC Screen Replacement: 步骤 2 中的图像 2，2

    • Carefully pry the tape from the battery, the bottom left chip, and the ribbon cable towards the bottom-right of the board. The bottom left has a little silver square component that must also be unclipped and untaped.

    • The battery is glued to the back of the screen; therefore pull the battery off of the back with caution. There will be resistance but that's okay.

    编辑

  3. MaxWest TAB-7360DC Screen Replacement: 步骤 3 中的图像 1，1

    • Gently unclip the data cable retainers and remove the wires from the junctions.

    • Peel the tape off the wire near the bottom of the case.

    编辑

  5. MaxWest TAB-7360DC Screen Replacement: 步骤 4 中的图像 1，1

    • Remove the two 4mm screws (circled in orange) with a 00 Phillips head driver.

    • Unclip the black plastic retainer near the data port. The PCB should now be able to be gently pulled off.

    编辑

  6. MaxWest TAB-7360DC Screen Replacement: 步骤 5 中的图像 1，1

    • Make contact with the battery terminals with the hot tip of the soldering iron for a few seconds while slowly pulling the wire away.

    • DO NOT TOUCH BOTH THE BLACK AND RED LEADS AT THE SAME TIME WITH THE SOLDERING IRON

    编辑

  7. MaxWest TAB-7360DC Screen Replacement, Motherboard: 步骤 6 中的图像 1，2 MaxWest TAB-7360DC Screen Replacement, Motherboard: 步骤 6 中的图像 2，2

    • With the tweezers, grab onto the gray part of the ribbon clamps and pull away from the ribbons.

    • Once the ribbons are unclamped, they are able to slide out.

    编辑

  8. MaxWest TAB-7360DC Screen Replacement, Screen: 步骤 7 中的图像 1，1

    • Pick up the motherboard and carefully place adjacent to the battery.

    编辑

  9. MaxWest TAB-7360DC Screen Replacement: 步骤 8 中的图像 1，1

    • Use plastic prying tool to lift the metallic surface upward. ( It doesn't matter where)

    • Make sure to work the prying tool around the entire screen edge. Lift screen when completely loose.

    编辑

  10. MaxWest TAB-7360DC Screen Replacement: 步骤 9 中的图像 1，1

    • Remove screen and place to the side.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与2其他贡献者

Sam Cook

于03/21/18注册

103 声望

撰写一个指南

徽章: 4

+1个徽章

团队

IUPUI, Team S4-G3, Baechle Spring 2018 IUPUI, Team S4-G3, Baechle Spring 2018 的会员

IUPUI-BAECHLE-S18S4G3

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 7

过去 30 天： 45

总计 1,278