简介

This guide will show you how to properly replace the speaker for the the Mattel Loopz interactive game.

  1. Use a No. 2 Phillips head screwdriver to take out the 1/4" screw that holds the battery cover in place on the bottom of the device.
    • Use a No. 2 Phillips head screwdriver to take out the 1/4" screw that holds the battery cover in place on the bottom of the device.

  2. Take out the 4 AA Batteries.
    • Take out the 4 AA Batteries.

    • Remove red screw covers (13 total) using spudger.

    • Remove the thirteen 12.7mm screws with a #1 Phillips screwdriver.

    • Remove 6 white caps using spudger to reveal screws underneath.

    • Remove the six 16mm screws with a #1 Phillips screwdriver.

    • Remove the white cover. Be sure to remove the front and the back.

    • Remove the black, plastic cover to reveal the internal electronics as shown.

    • Remove the two 6.4mm screws with a #1 Phillips screwdriver.

    • Remove the speaker as shown.

    • Use a soldering iron to desolder the red and black speaker wires from the speaker.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Trevor Lasiter

于2018年01月08日注册

219 信誉积分

撰写一个指南

团队

IUPUI, Team S1-G2, Freund Spring 2018 IUPUI, Team S1-G2, Freund Spring 2018 的会员

IUPUI-FREUND-S18S1G2

3 名成员

创作了2篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 14

总计 65