修复你的物品 社区 商店

Magic Bullet NutriBullet Base Replacement

简介

If you notice any sharp, moving components outside of your NutriBullet base, then use this replacement guide to learn how to remove and replace the base.

你所需要的

  1. Magic Bullet NutriBullet Base Replacement, Base: 步骤 1 中的图像 1，1

    • Unplug the device from the wall and turn the powerbase upside down.

    编辑

  3. Magic Bullet NutriBullet Base Replacement: 步骤 2 中的图像 1，2 Magic Bullet NutriBullet Base Replacement: 步骤 2 中的图像 2，2

    • Unscrew the four 10mm screws located on the bottom of the powerbase using the Phillips Head #2 Screwdriver.

    编辑

  4. Magic Bullet NutriBullet Base Replacement: 步骤 3 中的图像 1，1

    • Once the screws are removed, use slight tension to pull the plastic base up.

    • Make sure the cord does not get caught or frayed by the fan, which is located in the center of the power base.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与4其他贡献者

Angela Wong

于01/22/15注册

1,108 声望

创作了3篇指南

徽章: 19

+ 16更多徽章

团队

Cal Poly, Team 19-8, Maness Winter 2015 Cal Poly, Team 19-8, Maness Winter 2015 的会员

CPSU-MANESS-W15S19G8

4 名成员

创作了10篇指南

3条评论

So far it was easy! Yeah!

Elaine - 回复

With a lot of force can’t get bottom of even 4 screws removed Bullet don’t work anymore may be a piece of junk now

Tommy Simpson - 回复

Where can you buy the base to replace?

Anne-Christine von Wetter - 回复

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 12

过去 30 天： 49

总计 9,670