跳转到主内容

Magic Bullet MB1001B Power Cord Replacement

你所需要的

  1. Magic Bullet MB1001B Power Cord Replacement, Power Cord: 步骤 1 中的图像 1,1
    • Remove the four rubber pegs from the feet on the base of the Magic Bullet using the spudger.

  2. Magic Bullet MB1001B Power Cord Replacement: 步骤 2 中的图像 1,1
    • Remove the four 14.0 mm Phillips head screws in the feet of the base of the Magic Bullet using the Phillips #1 screwdriver.

  3. Magic Bullet MB1001B Power Cord Replacement: 步骤 3 中的图像 1,1
    • Remove the black base plate.

  4. Magic Bullet MB1001B Power Cord Replacement: 步骤 4 中的图像 1,1
    • Remove the two 13.0 mm Phillips head screws from the white plastic cable guide using a Phillips #1 screwdriver.

  5. Magic Bullet MB1001B Power Cord Replacement: 步骤 5 中的图像 1,1
    • Remove the white plastic cable guide.

  6. Magic Bullet MB1001B Power Cord Replacement: 步骤 6 中的图像 1,1
    • Remove the two crimp caps from the end of the wires.

    • You will need to purchase new crimp caps and use pliers to crimp the new crimp caps on the connected wires during reassembly.

  7. Magic Bullet MB1001B Power Cord Replacement: 步骤 7 中的图像 1,1
    • Separate the black wires of the power cord from the red wires on the Magic Bullet base.

    • Be sure to mark which wires are connected before separating them to ensure that they are properly reconnected during reassembly.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Bridget Carr

于10/06/15注册

266 声望

撰写一个指南

团队

Cal Poly, Team 12-13, Maness Fall 2015 Cal Poly, Team 12-13, Maness Fall 2015 的会员

CPSU-MANESS-F15S12G13

4 名成员

创作了8篇指南

2条评论

I accidentally burnt through my power cord. What type of power cord do I need to replace it?

virginia.cooke - 回复

Where do we get a new power cord, and if that does not work, what do we do next?

davidcohnkettlebells - 回复

添加评论

浏览统计数据:

过去 24 小时: 3

过去 7 天: 5

过去 30 天: 16

总计 2,357