修复你的物品 社区 商店

Magellan RoadMate 5120-LMTX Battery Replacement

简介

Rechargeable batteries eventually degrade and lose their ability to hold a charge. Once this happens, the only fix is to replace the battery. Ensure that your device is powered off before beginning this step.

你所需要的

  1. Magellan RoadMate 5120-LMTX Battery Replacement, Back Cover: 步骤 1 中的图像 1，3 Magellan RoadMate 5120-LMTX Battery Replacement, Back Cover: 步骤 1 中的图像 2，3 Magellan RoadMate 5120-LMTX Battery Replacement, Back Cover: 步骤 1 中的图像 3，3

    • Power off the Magellan RoadMate before beginning.

    • Remove the six 5mm Phillips #00 screws from the back of device.

    翻译

  2. Magellan RoadMate 5120-LMTX Battery Replacement: 步骤 2 中的图像 1，3 Magellan RoadMate 5120-LMTX Battery Replacement: 步骤 2 中的图像 2，3 Magellan RoadMate 5120-LMTX Battery Replacement: 步骤 2 中的图像 3，3

    • Pry back cover off with a plastic opening tool just enough to see where the speaker is attached to the motherboard.

    • Do not fully open the back cover or you risk damaging the speaker wire.

    • Use a spudger to disconnect the speaker connection from the motherboard.

    翻译

  4. Magellan RoadMate 5120-LMTX Battery Replacement, Battery: 步骤 3 中的图像 1，2 Magellan RoadMate 5120-LMTX Battery Replacement, Battery: 步骤 3 中的图像 2，2

    • Run the tip of a spudger between the battery and the housing to loosen the double-sided tape holding the battery in.

    • Still using the spudger tool, pry the battery from the housing.

    • If you damage the tape while trying to remove the battery, you can replace it with any double-sided tape.

    翻译

  5. Magellan RoadMate 5120-LMTX Battery Replacement: 步骤 4 中的图像 1，3 Magellan RoadMate 5120-LMTX Battery Replacement: 步骤 4 中的图像 2，3 Magellan RoadMate 5120-LMTX Battery Replacement: 步骤 4 中的图像 3，3

    • Pull the edge of the tape up to remove the tape that holds the battery wire to the motherboard.

    • There is a clear rectangular adhesive strip that also needs to be removed with the pointy end of a spudger.

    • Slowly pull the connection from the motherboard.

    • Do not pull too hard or you will risk damaging the wires.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Steven Prout

于10/08/16注册

231 声望

创作了2篇指南

徽章: 5

+ 2更多徽章

团队

IUPUI, Team 4-4, Wilson Fall 2016 IUPUI, Team 4-4, Wilson Fall 2016 的会员

IUPUI-WILSON-F16S4G4

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 2

过去 30 天： 4

总计 473