跳转到主内容

本指南有最近更改,您可查看未经巡查的最新版本

Magellan RoadMate 1200 GPS Sensor Replacement

你所需要的

  1. Magellan RoadMate 1200 GPS Sensor Replacement, Back Cover: 步骤 1 中的图像 1,2 Magellan RoadMate 1200 GPS Sensor Replacement, Back Cover: 步骤 1 中的图像 2,2
    • Remove the four rubber caps from the back by using the Phillips #00 screwdriver.

  2. Magellan RoadMate 1200 GPS Sensor Replacement: 步骤 2 中的图像 1,1
    • Remove the four screws holding the cover in place by using the Phillips #00 screwdriver.

  3. Magellan RoadMate 1200 GPS Sensor Replacement: 步骤 3 中的图像 1,2 Magellan RoadMate 1200 GPS Sensor Replacement: 步骤 3 中的图像 2,2
    • Remove the back cover from the device by separating the back cover along its seam.

    • Slowly lift the cover—the speaker is screwed onto the back cover and is connected to the circuit board.

  4. Magellan RoadMate 1200 GPS Sensor Replacement: 步骤 4 中的图像 1,2 Magellan RoadMate 1200 GPS Sensor Replacement: 步骤 4 中的图像 2,2
    • Pull the speaker cord, horizontally, by its base, away from the motherboard.

    • When reassembling, make sure that you plug the terminal in the same way. The black wire should be on the side farthest from the battery.

  5. Magellan RoadMate 1200 GPS Sensor Replacement, Motherboard: 步骤 5 中的图像 1,1
    • Remove the two screws on that are located on opposite sides of the board.

  6. Magellan RoadMate 1200 GPS Sensor Replacement: 步骤 6 中的图像 1,1
    • Lift up the circuit board and disconnect the GPS wire, pulling horizontally from its connector port.

  7. Magellan RoadMate 1200 GPS Sensor Replacement, GPS Sensor: 步骤 7 中的图像 1,2 Magellan RoadMate 1200 GPS Sensor Replacement, GPS Sensor: 步骤 7 中的图像 2,2
    • Carefully flip the circuit board out so you can get to the sensor easily.

    • Remove the tape holding the sensor to the display and take out the sensor.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Ross Light

于04/12/10注册

217 声望

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 3,132