跳转到主内容

Mad Catz Dual Force 2 Pro Vibration Motors Replacement

你所需要的

  1. Mad Catz Dual Force 2 Pro Vibration Motors Replacement, Remove Cover: 步骤 1 中的图像 1,1
    • Remove the six 7 mm Phillips screws from the rear cover.

  2. Mad Catz Dual Force 2 Pro Vibration Motors Replacement: 步骤 2 中的图像 1,1
    • Remove the back of the controller.

    • There are no loose items in the controller that can fall out, so you can open it, generally, however you want.

  3. Mad Catz Dual Force 2 Pro Vibration Motors Replacement: 步骤 3 中的图像 1,1
    • Remove the two 7 mm screws on the closest circuit board.

  4. Mad Catz Dual Force 2 Pro Vibration Motors Replacement: 步骤 4 中的图像 1,2 Mad Catz Dual Force 2 Pro Vibration Motors Replacement: 步骤 4 中的图像 2,2
    • Grip the sides of the motor you wish to replace and lift up.

    • Be careful not to tear the wires that connect the motors to the motherboard.

  5. Mad Catz Dual Force 2 Pro Vibration Motors Replacement, Remove the Screw: 步骤 5 中的图像 1,1
    • Use a soldering iron to de-solder both vibration motor wires from the motherboard.

    • If you do not know how to solder, see the soldering guide for instructions.

    • The positive (red) wire connects nearest the edge of the motherboard.

    • When soldering on circuit boards, be sure not to overheat the connection as permanent damage may result.

  6. Mad Catz Dual Force 2 Pro Vibration Motors Replacement: 步骤 6 中的图像 1,1
    • If needed, repeat the last two steps for the other vibration motors.

结论

To reassemble your device, follow these instructions in reverse order.

Alexander Coyne

于01/11/15注册

658 声望

创作了5篇指南

团队

USF Tampa, Team 7-2, Remmell Winter 2015 USF Tampa, Team 7-2, Remmell Winter 2015 的会员

USFT-REMMELL-W15S7G2

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 3

总计 316