跳转到主内容

简介

The trackpad is used to move the cursor on the screen. It is located below the keyboard.

配件

没有特定配件。

  1. Macintosh Powerbook 5300cs Trackpad Replacement, Battery: 步骤 1 中的图像 1,1
    • The battery compartment is located in the front-right side of the laptop.

  2. Macintosh Powerbook 5300cs Trackpad Replacement: 步骤 2 中的图像 1,1
    • To insert the battery, gently slide it into the compartment until it clicks in place.

    • To remove, slide the button highlighted in the red rectangle to the right to release the battery and slide it from the compartment.

  3. Macintosh Powerbook 5300cs Trackpad Replacement, Keyboard: 步骤 3 中的图像 1,1
    • With the laptop upside down and with the battery removed, use a Torx #9 screw driver to remove the three .84 in. screws shown.

  4. Macintosh Powerbook 5300cs Trackpad Replacement: 步骤 4 中的图像 1,2 Macintosh Powerbook 5300cs Trackpad Replacement: 步骤 4 中的图像 2,2
    • Carefully pull up on the front of the keyboard to pop it out from the case.

    • Then slide the back out so the keyboard becomes nearly free.

  5. Macintosh Powerbook 5300cs Trackpad Replacement: 步骤 5 中的图像 1,3 Macintosh Powerbook 5300cs Trackpad Replacement: 步骤 5 中的图像 2,3 Macintosh Powerbook 5300cs Trackpad Replacement: 步骤 5 中的图像 3,3
    • Disconnect the ribbon that is connecting the keyboard to the rest of the computer.

    • Pull the keyboard out and repair or replace as needed.

  6. Macintosh Powerbook 5300cs Trackpad Replacement, Trackpad: 步骤 6 中的图像 1,3 Macintosh Powerbook 5300cs Trackpad Replacement, Trackpad: 步骤 6 中的图像 2,3 Macintosh Powerbook 5300cs Trackpad Replacement, Trackpad: 步骤 6 中的图像 3,3
    • Remove the front plastic panel of the laptop by carefully lifting it up.

  7. Macintosh Powerbook 5300cs Trackpad Replacement: 步骤 7 中的图像 1,1
    • Remove the orange stripped ribbon that connects the trackpad to the rest of the laptop by carefully pulling up.

  8. Macintosh Powerbook 5300cs Trackpad Replacement: 步骤 8 中的图像 1,2 Macintosh Powerbook 5300cs Trackpad Replacement: 步骤 8 中的图像 2,2
    • With a Torx #9 screwdriver, remove the two .20 in. screws circled in red that are holding the trackpad in place.

    • Then disconnect the ribbon highlighted with the red rectangle connecting the trackpad to the laptop.

  9. Macintosh Powerbook 5300cs Trackpad Replacement: 步骤 9 中的图像 1,1
    • The trackpad can now be removed from the laptop.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Ronan

于2011年10月10日注册

63 信誉积分

创作了4篇指南

团队

Cal Poly, Team 6-1, Regan Fall 2011 Cal Poly, Team 6-1, Regan Fall 2011 的会员

CPSU-REGAN-F11S6G1

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 5

总计 915