跳转到主内容

配件

没有特定配件。

  1. Macintosh Powerbook 5300cs RAM Replacement, Battery: 步骤 1 中的图像 1,1
    • The battery compartment is located in the front-right side of the laptop.

  2. Macintosh Powerbook 5300cs RAM Replacement: 步骤 2 中的图像 1,1
    • To insert the battery, gently slide it into the compartment until it clicks in place.

    • To remove, slide the button highlighted in the red rectangle to the right to release the battery and slide it from the compartment.

  3. Macintosh Powerbook 5300cs RAM Replacement, Keyboard: 步骤 3 中的图像 1,1
    • With the laptop upside down and with the battery removed, use a Torx #9 screw driver to remove the three .84 in. screws shown.

  4. Macintosh Powerbook 5300cs RAM Replacement: 步骤 4 中的图像 1,2 Macintosh Powerbook 5300cs RAM Replacement: 步骤 4 中的图像 2,2
    • Carefully pull up on the front of the keyboard to pop it out from the case.

    • Then slide the back out so the keyboard becomes nearly free.

  5. Macintosh Powerbook 5300cs RAM Replacement: 步骤 5 中的图像 1,3 Macintosh Powerbook 5300cs RAM Replacement: 步骤 5 中的图像 2,3 Macintosh Powerbook 5300cs RAM Replacement: 步骤 5 中的图像 3,3
    • Disconnect the ribbon that is connecting the keyboard to the rest of the computer.

    • Pull the keyboard out and repair or replace as needed.

  6. Macintosh Powerbook 5300cs RAM Replacement, RAM: 步骤 6 中的图像 1,3 Macintosh Powerbook 5300cs RAM Replacement, RAM: 步骤 6 中的图像 2,3 Macintosh Powerbook 5300cs RAM Replacement, RAM: 步骤 6 中的图像 3,3
    • Remove the RAM board located underneath the keyboard by carefully popping it out from its connection. Reinstall or replace as necessary.

结论

To reassemble your device, follow these instructions in reverse order.

Ronan

于2011年10月10日注册

63 信誉积分

创作了4篇指南

团队

Cal Poly, Team 6-1, Regan Fall 2011 Cal Poly, Team 6-1, Regan Fall 2011 的会员

CPSU-REGAN-F11S6G1

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 5

总计 768