跳转到主内容

Macintosh PowerBook 165c Trackball Replacement

你所需要的

  1. Macintosh PowerBook 165c Trackball Replacement, Battery: 步骤 1 中的图像 1,1
    • Orient the computer so the battery is facing you.

    • Slide the gray plastic battery cover to the right.

  2. Macintosh PowerBook 165c Trackball Replacement: 步骤 2 中的图像 1,1
    • Pull the battery toward yourself until it is fully detached.

  3. Macintosh PowerBook 165c Trackball Replacement, Input/Output Door: 步骤 3 中的图像 1,1
    • Orient the computer right side up with the rear facing you.

    • Open the Input/Output (I/O) door.

  4. Macintosh PowerBook 165c Trackball Replacement: 步骤 4 中的图像 1,1
    • Carefully bend the door into an arch until one of the pins releases from its slot.

    • Once one of the pins is free, remove the I/O door from the computer.

  5. Macintosh PowerBook 165c Trackball Replacement, Lower Case: 步骤 5 中的图像 1,1
    • Orient the computer with the bottom facing up and rear facing you. You should be able to read the Macintosh label in this position.

  6. Macintosh PowerBook 165c Trackball Replacement: 步骤 6 中的图像 1,1
    • Use a T8 torx screwdriver to remove the 6.8mm long screw above and to the right of the modem jack.

    • Twist counter clockwise to remove the screw.

  7. Macintosh PowerBook 165c Trackball Replacement: 步骤 7 中的图像 1,1
    • Use a T10 torx screwdriver to remove the four, 18mm long screws from the lower case.

  8. Macintosh PowerBook 165c Trackball Replacement: 步骤 8 中的图像 1,2 Macintosh PowerBook 165c Trackball Replacement: 步骤 8 中的图像 2,2
    • Place your hands on the lower case, just above the I/O panel, and slowly lift the lower case a few inches above the main body of the computer.

    • Release the large, gray interconnect ribbon cable just behind the I/O panel.

    • Caution: Lower case cannot be fully removed until two plastic clips in the front corners are released. See the following step for details.

  9. Macintosh PowerBook 165c Trackball Replacement: 步骤 9 中的图像 1,2 Macintosh PowerBook 165c Trackball Replacement: 步骤 9 中的图像 2,2
    • Place your thumb on the upper case, inside the empty battery slot, and your index finger near your thumb on the left side of the lower case.

    • Pinch your thumb and index finger towards each other to release the clip. Without releasing pressure on the pinch grip, use your index finger to push the lower case upwards.

    • Lift the lower case to remove it.

  10. Macintosh PowerBook 165c Trackball Replacement, Trackball: 步骤 10 中的图像 1,2 Macintosh PowerBook 165c Trackball Replacement, Trackball: 步骤 10 中的图像 2,2
    • Locate the trackball assembly. It is in the upper case and can be identified by a green circuit board.

    • Open the white tab fastener by pulling out on each side. and remove the green and silver ribbon cable.

    • Remove the green and silver ribbon cable by gently pulling it away from the opened tab fastener.

  11. Macintosh PowerBook 165c Trackball Replacement: 步骤 11 中的图像 1,1
    • Use a T8 torx screwdriver to remove the six, 6.8mm long screws from the top of the green circuit board.

  12. Macintosh PowerBook 165c Trackball Replacement: 步骤 12 中的图像 1,1
    • Remove all four components of the trackball assembly by lifting upward.

    • The four components of the trackball assembly should include: the green circuit board, a metal support, the track ball, and the casing.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

John

于10/12/11注册

88 声望

创作了4篇指南

团队

Cal Poly, Team 6-3, Regan Fall 2011 Cal Poly, Team 6-3, Regan Fall 2011 的会员

CPSU-REGAN-F11S6G3

4 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 3

过去 30 天: 9

总计 1,223