跳转到主内容

本指南有最近更改,您可查看未经巡查的最新版本

Macintosh PowerBook 1400 Series Hard Drive Replacement

你所需要的

  1. Macintosh PowerBook 1400 Series Hard Drive Replacement, Battery: 步骤 1 中的图像 1,1
    • Turn the device upside down and then locate the battery latch near the front of the device.

  2. Macintosh PowerBook 1400 Series Hard Drive Replacement: 步骤 2 中的图像 1,1
    • Slide the latch to the left to release the battery.

  3. Macintosh PowerBook 1400 Series Hard Drive Replacement: 步骤 3 中的图像 1,1
    • Continue holding the latch then gently pull the battery out of the device.

    • Place the battery in a safe location.

  4. Macintosh PowerBook 1400 Series Hard Drive Replacement, CD-ROM Drive: 步骤 4 中的图像 1,1
    • Locate the CD-ROM Drive latch.

  5. Macintosh PowerBook 1400 Series Hard Drive Replacement: 步骤 5 中的图像 1,1
    • Slide the latch to the right to release the CD ROM drive.

  6. Macintosh PowerBook 1400 Series Hard Drive Replacement: 步骤 6 中的图像 1,1
    • Continue holding the latch then gently pull the CD-ROM Drive out of the device.

    • Place the CD ROM drive in a safe location.

  7. Macintosh PowerBook 1400 Series Hard Drive Replacement, Keyboard: 步骤 7 中的图像 1,1
    • Locate the speaker cover.

  8. Macintosh PowerBook 1400 Series Hard Drive Replacement: 步骤 8 中的图像 1,1
    • Press firmly on each end of the speaker cover and slide it to the left.

    I found it was easy to get a spudger over the left edge and lift it up a bit, then push the bar to the left, It pops right off after that.

    Jimmy James - 回复

  9. Macintosh PowerBook 1400 Series Hard Drive Replacement: 步骤 9 中的图像 1,1
    • Gently lift the speaker cover to remove it.

  10. Macintosh PowerBook 1400 Series Hard Drive Replacement: 步骤 10 中的图像 1,1
    • Lift the keyboard up from the back using a spudger(wedge side).

  11. Macintosh PowerBook 1400 Series Hard Drive Replacement: 步骤 11 中的图像 1,1
    • Gently lift the keyboard until only the ribbon cable remains attached.

  12. Macintosh PowerBook 1400 Series Hard Drive Replacement: 步骤 12 中的图像 1,1
    • Tilt the keyboard away from the screen.

  13. Macintosh PowerBook 1400 Series Hard Drive Replacement: 步骤 13 中的图像 1,1
    • Locate the six screws that secure the heatsink.

    This is not necessary to remove the HDD. Go directly to step 20.

    Kenneth DeVries - 回复

    That isn't the HDD!

    Dix Dox - 回复

  14. Macintosh PowerBook 1400 Series Hard Drive Replacement: 步骤 14 中的图像 1,1
    • Remove the six screws from the heatsink using the Philips #1 screwdriver.

  15. Macintosh PowerBook 1400 Series Hard Drive Replacement: 步骤 15 中的图像 1,1
    • Lift the heatsink from the side closest to the laptop screen.

  16. Macintosh PowerBook 1400 Series Hard Drive Replacement: 步骤 16 中的图像 1,1
    • Remove the heatsink.

  17. Macintosh PowerBook 1400 Series Hard Drive Replacement: 步骤 17 中的图像 1,1
    • Gently pull up on the beige ribbon lock until it moves a short distance on both sides to separate the ribbon cable from the connector.

  18. Macintosh PowerBook 1400 Series Hard Drive Replacement: 步骤 18 中的图像 1,1
    • Detach the ribbon cable.

  19. Macintosh PowerBook 1400 Series Hard Drive Replacement: 步骤 19 中的图像 1,1
    • Remove the keyboard.

  20. Macintosh PowerBook 1400 Series Hard Drive Replacement, Hard Drive: 步骤 20 中的图像 1,1
    • Locate and identify the two screws that attach the hard drive to the computer.

  21. Macintosh PowerBook 1400 Series Hard Drive Replacement: 步骤 21 中的图像 1,1
    • Remove the screws with a Phillips #0 screwdriver.

  22. Macintosh PowerBook 1400 Series Hard Drive Replacement: 步骤 22 中的图像 1,1
    • Once the screws are removed, lift up the end of the hard drive using your finger tips.

  23. Macintosh PowerBook 1400 Series Hard Drive Replacement: 步骤 23 中的图像 1,1
    • Fully lift the hard drive vertically against the side of the computer.

  24. Macintosh PowerBook 1400 Series Hard Drive Replacement: 步骤 24 中的图像 1,1
    • Push a finger down onto the plastic strap.

  25. Macintosh PowerBook 1400 Series Hard Drive Replacement: 步骤 25 中的图像 1,1
    • Remove the hard drive from the computer by pushing down on the plastic strap and pulling up on the hard drive.

    its really a PITA to get an ide hdd back into this.. the hdd sits in this aluminium cage and you cant just stick it onto the ultra short ribbon cable because this case has a small latch on the back that has to be inserted into the side of the hdd bay.

    Jamba - 回复

结论

To reassemble your device, follow these instructions in reverse order.

11等其他人完成本指南。

团队

Cal Poly, Team 10-39, Forte Spring 2011 Cal Poly, Team 10-39, Forte Spring 2011 的会员

CPSU-FORTE-S11S10G39

5 名成员

创作了6篇指南

一条评论

Hi iFixIt thanks for all the details BUT the keyboard can indeed stay in

when changing the hard drive. Just slide it a bit to the right after step

11, the ribbon cble does not take any damage. SO: from step 12 jump

straight to step 20. The heat sink can stay untouched, which i find not

unimportant to mention. Regards, TB75

TB75 - 回复

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 37

总计 8,677