修复你的物品 社区 商店

本指南有最近更改，您可查看未经巡查的最新版本。

MacBook Unibody Model A1342 Rear Speaker Assembly Replacement

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

简介

This guide is an internal private guide used as a prereq.

你所需要的

  1. MacBook Unibody Model A1342 Rear Speaker Assembly Replacement, Rear Speaker Assembly: 步骤 1 中的图像 1，1

    • Use the flat end of a spudger to pry the AirPort/Bluetooth cable connector up off the logic board.

    翻译

  2. MacBook Unibody Model A1342 Rear Speaker Assembly Replacement: 步骤 2 中的图像 1，1

    • Remove the following screws securing the right speaker assembly to the upper case:

    • One 12 mm Phillips screw.

    • One 3 mm Phillips screw.

    翻译

  3. MacBook Unibody Model A1342 Rear Speaker Assembly Replacement: 步骤 3 中的图像 1，1

    • Remove the single 2.2 mm Phillips screw inserted horizontally into the side of the optical drive.

    翻译

  5. MacBook Unibody Model A1342 Rear Speaker Assembly Replacement: 步骤 4 中的图像 1，2 MacBook Unibody Model A1342 Rear Speaker Assembly Replacement: 步骤 4 中的图像 2，2

    • Pry the AirPort and Bluetooth antenna connectors (3 total) up off the AirPort/Bluetooth card.

    • De-route the long antenna from its channel in the rear speaker housing.

    翻译

  6. MacBook Unibody Model A1342 Rear Speaker Assembly Replacement: 步骤 5 中的图像 1，1

    • Use the flat end of a spudger to pry the rear speaker cable connector up off the logic board.

    翻译

  7. MacBook Unibody Model A1342 Rear Speaker Assembly Replacement: 步骤 6 中的图像 1，1

    • Remove the rear speaker assembly from the upper case.

    翻译

  8. MacBook Unibody Model A1342 Rear Speaker Assembly Replacement: 步骤 7 中的图像 1，2 MacBook Unibody Model A1342 Rear Speaker Assembly Replacement: 步骤 7 中的图像 2，2

    • Carefully peel the AirPort/Bluetooth cable from its channel within the rear speaker assembly.

    • Use the flat end of a spudger to pry the AirPort/Bluetooth cable up off the rear speaker.

    翻译

  9. MacBook Unibody Model A1342 Rear Speaker Assembly Replacement: 步骤 8 中的图像 1，1

    • Remove three 3 mm Phillips screws securing the AirPort/Bluetooth board to the rear speaker assembly.

    翻译

  10. MacBook Unibody Model A1342 Rear Speaker Assembly Replacement: 步骤 9 中的图像 1，1

    • Lift the AirPort/Bluetooth board up off the rear speaker assembly.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 695