跳转到主内容

MacBook Pro 17" Unibody Lower Case Replacement

你所需要的

  1. MacBook Pro 17" Unibody Lower Case Replacement, Lower Case: 步骤 1 中的图像 1,1
    • Remove the following ten screws securing the lower case to the upper case:

    • Three 13.5 mm Phillips screws.

    • Seven 3 mm Phillips screws.

  2. MacBook Pro 17" Unibody Lower Case Replacement: 步骤 2 中的图像 1,2 MacBook Pro 17" Unibody Lower Case Replacement: 步骤 2 中的图像 2,2
    • Wedge your fingers between the lower case and the vent, and lift upward to release the two clips holding the lower case to the upper case.

    • During reassembly, carefully align the lower case and then press it firmly until both clips engage.

    • Remove the lower case.

结论

To reassemble your device, follow these instructions in reverse order.

19等其他人完成本指南。

一条评论

Is there a DIY on replacing the rubber feet?

retrotechpost - 回复

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 11

过去 30 天: 35

总计 17,834