跳转到主内容

配件

没有特定配件。

  1. Remove the two 7.9 mm Phillips screws securing the left speaker assembly to the logic board.
    • Remove the two 7.9 mm Phillips screws securing the left speaker assembly to the logic board.

  2. Slightly lift the left speaker assembly off the logic board. Use the flat end of a spudger to lift the microphone and left speaker connectors out of their sockets on the logic board.
    • Slightly lift the left speaker assembly off the logic board.

    • Use the flat end of a spudger to lift the microphone and left speaker connectors out of their sockets on the logic board.

    • Pry up from beneath the wires.

    • Remove the left speaker assembly from the logic board.

结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 1,311