跳转到主内容

简介

Remove the lower case to access most of your MacBook Pro's internals.

  1. Remove the following ten screws securing the lower case to the upper case:
    • Remove the following ten screws securing the lower case to the upper case:

    • Three 13.5 mm (14.1 mm) Phillips screws.

    • Seven 3 mm Phillips screws.

    • When removing these screws, note how they come out at a slight angle. They must be reinstalled the same way.

  2. Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.
    • Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.

    • Remove the lower case and set it aside.

结论

To reassemble your device, follow these instructions in reverse order.

19等其他人完成本指南。

Andrew Optimus Goldheart

于2009年10月17日注册

474,562 信誉积分

创作了410篇指南

团队

iFixit iFixit 的会员

Community

138 名成员

创作了16,506篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 22

过去的30天: 75

总计 16,807