修复你的物品 社区 商店

MacBook Pro 15" Unibody Mid 2010 Optical Drive Replacement

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

简介

This guide is an internal guide used as a prereq.

你所需要的

  1. MacBook Pro 15" Unibody Mid 2010 Optical Drive Replacement, Optical Drive: 步骤 1 中的图像 1，1

    • Use the flat end of a spudger to pry the AirPort/Bluetooth ribbon cable connector up off the logic board.

    编辑

  2. MacBook Pro 15" Unibody Mid 2010 Optical Drive Replacement: 步骤 2 中的图像 1，1

    • Disconnect the camera cable by pulling its connector away from the socket (toward the optical drive) on the logic board.

    编辑

  4. MacBook Pro 15" Unibody Mid 2010 Optical Drive Replacement: 步骤 3 中的图像 1，1

    • Use the flat end of a spudger to pry the optical drive connector up off the logic board.

    编辑

  5. MacBook Pro 15" Unibody Mid 2010 Optical Drive Replacement: 步骤 4 中的图像 1，2 MacBook Pro 15" Unibody Mid 2010 Optical Drive Replacement: 步骤 4 中的图像 2，2

    • Remove the two Phillips screws securing the AirPort/Bluetooth board housing.

    • Carefully rotate the AirPort/Bluetooth board housing (with AirPort/Antenna cables still attached) out of the lower case.

    编辑

  6. MacBook Pro 15" Unibody Mid 2010 Optical Drive Replacement: 步骤 5 中的图像 1，1

    • Remove the following three Phillips screws securing the optical drive to the upper case:

    • One 4.5 mm Phillips screw securing the optical drive bracket to the upper case near the fan.

    • Two 2.5 mm Phillips screws securing the optical drive to the upper case near the optical drive opening.

    编辑

  7. MacBook Pro 15" Unibody Mid 2010 Optical Drive Replacement: 步骤 6 中的图像 1，1

    • Lift the optical drive near its connector and pull it away from the upper case to remove it from the computer.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 956