跳转到主内容

当前版本的文档还未经巡查,您可以查看最新的已查核版本

2008 年底15寸 MacBook Pro 一体化机和2009年早期RAM更换

你所需要的

  1. 这个步骤还没有翻译 帮忙翻译一下

    2008 年底15寸 MacBook Pro 一体化机和2009年早期RAM更换: 步骤 1 中的图像 1,2 2008 年底15寸 MacBook Pro 一体化机和2009年早期RAM更换: 步骤 1 中的图像 2,2
    • With the case closed, place the Unibody top-side down on a flat surface.

    • Depress the grooved side of the access door release latch enough to grab the free end. Lift the release latch until it is vertical.

  2. 这个步骤还没有翻译 帮忙翻译一下

    2008 年底15寸 MacBook Pro 一体化机和2009年早期RAM更换: 步骤 2 中的图像 1,1
    • The access door should now be raised enough to lift it up and out of the Unibody.

  3. 2008 年底15寸 MacBook Pro 一体化机和2009年早期RAM更换, 电池: 步骤 3 中的图像 1,1
    • 在继续操作之前,请确保电池卡扣是垂直的。

    • 抓住半透明的塑料卡扣,将电池向上拉出一体化机。

    • 如果按下卡扣,它将把电池锁定到位。

  4. 2008 年底15寸 MacBook Pro 一体化机和2009年早期RAM更换, 底壳: 步骤 4 中的图像 1,1
    • 拧下将下底壳固定到机箱的以下八颗螺丝:

    • 一颗 5.4 mm 菲利普斯十字螺丝。

    • 三颗 14 mm 菲利普斯十字螺丝。

    • 四颗 3.5 mm 菲利普斯十字螺丝。

  5. 2008 年底15寸 MacBook Pro 一体化机和2009年早期RAM更换: 步骤 5 中的图像 1,1
    • 用两只手提起下底壳,使其脱离上壳体。

  6. 2008 年底15寸 MacBook Pro 一体化机和2009年早期RAM更换, RAM: 步骤 6 中的图像 1,1
    • 通过同时将每个卡扣推离RAM来打开芯片两侧。

    • 这些卡扣将芯片锁定在适当的位置,打开它们会导致芯片“弹出”。

  7. 2008 年底15寸 MacBook Pro 一体化机和2009年早期RAM更换: 步骤 7 中的图像 1,1
    • 弹出RAM芯片后,将其从插槽中直接拉出。

    • 如果安装了第二个RAM芯片,请重复此过程。

结论

请按逆序重组你的设备。

187等其他人完成本指南。

由衷感谢以下译者:

en zh

100%

Yuting Zhao正在帮助我们修复这个世界! 您也想加入吗?
开始翻译 ›

10条评论

Thank you ifixit. It was a breeze... 8Gb in the house... Best Regards

Bruno Perneta Correia - 回复

Hi Bruno!

Assuming you still have the MBP, I am curious to see what memory you installed to get 8 gigs. I just installed 2 X 4 gigs of Kingston PC3 106000 SODIM and my MBP does not want it. My tech assured me that if anything would do it, it was this memory.

Suggestions?

Thank you!

Ghislain

Ghislain -

As a breeze. Man, was my computer dirty! Now my computer feels like it's on amphetamines! Lol. So happy the pinwheels are gone. I can finally get work done and feel right about charging my clients hourly!

jayalovevibes - 回复

Thanks ifixit ... Easy reward & proud 8GB working power.

Tiny note: I wasn't sure weather or not it is important (or not) to remove the stickers from my 2 x 4GB RAM modules - I left the stickers on and it seems all running happily.

Grit - 回复

Installed 8GB of RAM without problems. :)

Been wondering if this system would support 16GB though, given that appropriate modules seem to be on the market, that it has a 64 bit EFI and that the never versions of OS X, booted in the 64 bit kernel (which has been the default mode for a few years, now) obviously support that and more…

jack - 回复

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 20

过去 30 天: 86

总计 102,967