跳转到主内容

MacBook Pro 15" Unibody Early 2011 Optical Drive Replacement

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

你所需要的

  1. MacBook Pro 15" Unibody Early 2011 Optical Drive Replacement, Optical Drive: 步骤 1 中的图像 1,1
    • Disconnect the camera cable connector from its socket on the logic board.

    • Do not lift up on the cable as you disconnect it from the logic board. Pull the cable parallel to the face of the logic board.

  2. MacBook Pro 15" Unibody Early 2011 Optical Drive Replacement: 步骤 2 中的图像 1,1
    • Use the flat end of a spudger to pry the AirPort/Bluetooth connector up from its socket on the logic board.

  3. MacBook Pro 15" Unibody Early 2011 Optical Drive Replacement: 步骤 3 中的图像 1,1
    • Use the flat end of a spudger to pry the optical drive connector up from its socket on the logic board.

  4. MacBook Pro 15" Unibody Early 2011 Optical Drive Replacement: 步骤 4 中的图像 1,2 MacBook Pro 15" Unibody Early 2011 Optical Drive Replacement: 步骤 4 中的图像 2,2
    • Remove following two screws:

    • Take care, as these screws are unusually easy to strip. Apply firm pressure while unscrewing. Read comments before proceeding.

    • One 8.6 mm Phillips screw

    • One 3.9 mm Phillips screw

    • Carefully rotate the AirPort/Bluetooth board housing (with AirPort/Antenna cables still attached) out of the lower case.

  5. MacBook Pro 15" Unibody Early 2011 Optical Drive Replacement: 步骤 5 中的图像 1,1
    • Remove the three 3.5 mm T6 Torx screws securing the optical drive to the upper case.

  6. MacBook Pro 15" Unibody Early 2011 Optical Drive Replacement: 步骤 6 中的图像 1,1
    • Lift the optical drive near its connector and pull it away from the upper case to remove it from the computer.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 1,252