跳转到主内容

MacBook Pro 15" Unibody 2.53 GHz Mid 2009 RAM Replacement

你所需要的

  1. MacBook Pro 15" Unibody 2.53 GHz Mid 2009 RAM Replacement, Lower Case: 步骤 1 中的图像 1,1
    • Remove the following ten screws securing the lower case to the upper case:

    • Seven 3 mm Phillips screws.

    • Three 13.5 mm Phillips screws.

  2. MacBook Pro 15" Unibody 2.53 GHz Mid 2009 RAM Replacement: 步骤 2 中的图像 1,1
    • Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.

    • Remove the lower case and set it aside.

  3. MacBook Pro 15" Unibody 2.53 GHz Mid 2009 RAM Replacement, RAM: 步骤 3 中的图像 1,2 MacBook Pro 15" Unibody 2.53 GHz Mid 2009 RAM Replacement, RAM: 步骤 3 中的图像 2,2
    • Release the tabs on each side of the chip by simultaneously pushing each tab away from the RAM.

    • These tabs lock the chip in place and releasing them will cause the chip to "pop" up.

    • After the RAM chip has popped up, pull it straight out of its socket.

    • Repeat this process if a second RAM chip is installed.

结论

To reassemble your device, follow these instructions in reverse order.

96等其他人完成本指南。

一条评论

How is this easier than removing a drive? Its both relatively easy. Otherwise good guides.

Jr. - 回复

添加评论

浏览统计数据:

过去 24 小时: 3

过去 7 天: 10

过去 30 天: 38

总计 40,924