MacBook Pro 15" Retina Display Mid 2012 AirPort/Camera Cable Replacement

步骤 1 AirPort/Camera Cable

• Use a spudger or tweezers to pry the three AirPort antenna cables straight up off of their sockets on the AirPort board.
• The cable connection points are fragile. Be careful to lift only on the connector, and not on the socket or cable.
• To reconnect, align the connector carefully into position over the socket, and press it down firmly with the flat of your spudger.
编辑
55条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 2

• Use the tip of a spudger to push the camera cable's plug toward the fan and out of its socket on the logic board.
• The plug in the photo has six connections, but some models have twelve connections. The process of removing the plug from its socket is the same for both.
• If the camera cable's plug won't come easily out of its socket on the logic board, fold back the rubber cover over the fan to gain access to the cable, then gently pull on the cable while using the spudger to gently push the plug out of its socket.
• Be sure to push parallel to the board, first on one side, then the other, to slowly "walk" the plug out of its socket. Do not pry up, or you will damage the socket.
编辑
34条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 3
• Insert the flat end of a spudger underneath the rubber heat sink cover on the right fan.
• Slide the spudger underneath the length of the cover, releasing the adhesive.
• Lift the cover and flip it back so that you can access the cables underneath.
编辑
4条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 4
• Use your fingers to pull the AirPort/Camera cables up off the fan.
• The cables are adhered to the fan, so peel them up carefully to avoid damaging them.
• Carefully de-route the cables from the plastic cable guide.
编辑
2条评论
添加一条评论
添加评论
1024
取消 发帖评论

作者

与8其他贡献者

Brett Hartt

于04/12/10注册

127,894 声望

创作了143篇指南

徽章: 52

• 
• 
• 

+ 49更多徽章

团队

iFixit iFixit 的会员

Staff

135 名成员

创作了16,767篇指南

嵌入本指南

选择一个尺寸并复制下面的代码，将本指南作为一个小插件嵌入到你的网站/论坛中。

预览